-AUDI A6 LE Feature - Control DVD, NAVI by touch (Optional) - Remote button value copy function (Refer to page no. 24) (Only available in models with remote) - More convenient installation via sub-board. - Plug & Play by LVDS cable...
-Precaution - You must keep the car key taken off from the car while you work this and finally, connect power of the interface. - When to connect the interface cable, you must keep the power cable taken off. - You must work this at the environment without any static electricity or damages.
-System Composition Remote Control Switch for source toggle AUDI Original Monitor Touch Input LVDS In/Out VIDEO NAVI CIRCUIT VIDEO CVBS (Rear Camera) POWER Car Input CIRCUIT TOUCH A/V OUT HEADREST MONITOR NAVI DIP S/W Power Input (+8VDC~+24VDC)
-REMOTE CONTROL POWER & PIP: N.C MENU : OSD operation OK : Select ▲ : Up ▼ : Down ◀ : Left, Long press - Factory Mode operation ▶ : Right *FACTORY MODE (Interface setting) Operated by long press with ◀ button or Pressing UP→DOWN→UP→MENU in order...
-MMI BUTTON ⑩ ⑨ ③ ① ⑧ ⑤ ② ④ ⑦ ⑧ ⑤ ⑦ ⑥ ⑩ ⑨ ⑥ <DVD, CMMB> <NAVIGATION> ⑤ OK ① Up ② Down ⑨ Move to right ③ Zoom In ⑩ Move to left ④ Zoom Out ⑤...
Page 15
-MMI BUTTON - Whether press ◀ button of remote or press UP→DOWN→UP→MENU in order to get factory menu, and then select “IR MEMORY” in UTIL menu. - IR MEMORY has DMB, NAVI menu, if choosing NAVI IR, the below image appears. <MMI Button Setting>...
-OSD Menu : (Optional) ※ For DVD OSD Menu operated, DVD must be connected with AV1 and DVD IR wire of RGB cable has to be wired with DVD’s remote sensor. On AV1 mode, once touch the screen, Menu window appears like left picture. If no action for 5 sec or touch any other parts of the screen, this will disappear.
Page 17
-OSD Menu : DBM, NAVI On AV2 mode, once touch the screen, Menu window appears like left picture. If no action for 5 sec or touch any other parts of the screen, this will disappear. When selecting “INPUT”, Menu window for mode switching appears like the below picture.
-OSD(On Screen Display) ※OSD Menu : Operated by “MENU” button of remote. · Analog RGB Mode · Video Mode IMAGE Menu - BRIGHTNESS - CONTRAST - SATURATION - HUE - SHARPNESS - USER IMAGE...
Page 19
OSD(On Screen Display) · Analog RGB Mode · Video Mode OSD Menu - LANGUAGE : Language Select of DVD, DMB OSD (ENGLISH, Chinese) - TRANSPARENT - H_POSITION - V_POSITION...
Page 20
OSD(On Screen Display) · Analog RGB Mode · Video Mode UTIL Menu : - USER RESET : Initializing all set values of navi or DVD...
Page 21
OSD(On Screen Display) · Analog RGB Mode COLOR : - RED -GREEN -BLUE -USER COLOR...
-Factory Mode · Factory Mode- Operated by long press with ◀ button or Pressing UP→DOWN→UP→MENU in order Factory Mode IMAGE – H-POSITION : Horizontal Image position adjustment - V-POSITION : Vertical Image position adjustment - PARK - PARK ENABLE : Rear parking Guide line setting - PARK SETUP : Rear parking guide line position adjustment (Refer to page no.
-Factory Mode : Rear parking guide line Factory Default : PARK ENABLE – OFF ① ① As left picture, Set “Park Enable” to “ON” in Factory Mode. (Default – OFF) ② ② After the setting done, rear parking guide line will appear in rear gear position.
-Factory Mode : IR Memory Function IR Memory Function? If user would like to control DVD or DMB by touch, User can get interface memorize DVD or DMB’s remote button value via this function. Step 1.) On Factory menu, select “IR MEMORY”...
Page 26
Factory Mode : IR Memory Function 3. As soon as pressing the button, the remote button value displays at the right corner and it is saved automatically. 4. Do other buttons as the same procedure. Step 5.) After all remote input finished, select “INPUT”...
-Factory Mode : DVD, DMB Type Selection Factory Default : DVD TYPE – NECVOX/SANYO (For Chinese DVD) DMB TYPE – CMMB (For Chinese DMB) UTIL – DVD TYPE (DMB TYPE) : If your desired DVD or DBM is not NECVOX or SANYO, you have to do IR MEMORY and “DVD TYPE”...
-Product Composition Remote : 1 EA Power Cable : 1 EA LCD IN Cable : 1 EA A/V Cable : 1 EA RGB (Navi) Cable : 1 EA IR Cable : 1 EA Toggle Switch : 1 EA IR OUT Cable: 1 EA TOUCH Cable(for board) : 1 EA TOUCH Screen Cable : 1 EA...
-Installation Structure 제공된 LCD-OUT 케이블 Original LCD Cable LCD-IN LCD-OUT 터치케이블 VIDEO INTERFACE (A6LE) ACC : 12v~24V DIP S/W Remote MODE A/V(IN/OUT) POWER (IN) SAFE REAR-C A/V(IN/OUT) MODE IR OUT RGB (IN) Monitor AUDIO R AUDIO L Touch 노 노 빨...
-Installation Guide ① Remove screws on Glove box. ② Open Glove box after removing Screws on Dash board. ④ Pull the glove box out to take apart ③ Open fuse box in front of passenger seat Remote swears.
Page 31
-Installation Guide ⑤ remove CD Changer ⑥ Before installation, must unplug the red original Power plug. ⑦ As the picture, remove the metal sleeve. ⑧ Separate the cable from car.
Page 32
-Installation Guide ⑨ Connect the offered LCD cable to OEM cable from LCD ⑩ Connect NAVI TOUCH Cable with Navigation. ⑪ Connect Touch Out cable to Touch from LCD ⑫ Complete...
Page 33
-NAVI Button ① Attention!! Find A, B Connectors of MMI module. For safety, unplug MMI Power Cable(B Connector) and then A connector. ② Find 16 pin after uncovering B connector.
Page 34
-NAVI Button ③Connect Navi orange wire from Power cable to the 16 pin of the connector. Connect Navi orange wire from Power cable to the 16 pin of the connector.
Page 35
-FAQ When can not change mode. -. Check if the IR Cable (Remote) is connected or not. -. Check if LED is turned on or not. If it is not turned on, Check if power cable is connected or not. -.