Do you have a question about the 82470 and is the answer not in the manual?
Questions and answers
Summary of Contents for Draper Expert 82470
Page 1
12L EPDM KNAPSACK PRESSURE SPRAYER 82470 IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT. INSTRUCTIONS These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before assembling, operating or maintaining this product.
Special EPDM seals and gaskets material allows for use with high temperature water, glycol, detergents, acid, organic and inorganic bleaching agents and hydraulic oil. 1.2 SPECIFICATION Stock no..........................82470 Part no........................PS12/B/EPDM Bottle capacity ........................15L Working capacity ........................12L...
HEALTH & SAFETY INFORMATION 2.1 GENERAL SAFETY WARNINGS WARNING: READ and UNDERSTAND the instructions completely before using these sprayers. The user must always ask the dealer for the safety card of the chemical product to be used, also for disposal of the residual liquid. The use of substances not in conformity with the current regulations is at the user’s risk and peril.
UNPACKING & CHECKING 4.1 PACKAGING Carefully remove the product from the packaging and examine it for any sign of damage that may have happened during shipping. Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the product.
Page 6
ASSEMBLY Fig.1 Fig.2 Small parts stored inside. Fig.3 Fig.4 Fig.5 Fig.6 Fig.8 Fig.7 - 6 -...
MAINTENANCE CLEANING THE BACKPACK SPRAYER: Press the trigger on the sprayer handle to release the pressure remaining through the lance. Unscrew tank cap, if the outside of the cap is dirty, thoroughly clean the area around the thread and thread O-ring. Clean the inlet filter and tank cap in clean water.
Need help?
Do you have a question about the 82470 and is the answer not in the manual?
Questions and answers