Polaroid POP Quick Start Manual page 18

- EN 301 489-17 V3.1.1 (2017-02)
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard
covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
(Radio)
- EN 300 328 V2.1.1:2015
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
transmission systems; Data transmission equipment operating in the 2.4GHz ISM band and
using wide band modulation techniques; Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive
A minimum separation distance of 20 cm must be maintained between the user's body and
the device, including the antenna during body-worn operation to comply with the RF exposure
requirements in Europe.
To compliance with RF Exposure requirements in Europe, third-party belt-clips, holsters or
similar accessories used by this device should not contain any metallic components. The use
of accessories that do not satisfy these requirements may not comply with RF exposure
requirements, and should be avoided.
Hereby, C+A Global, declares that this Polaroid Pop is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.meetpolaroid.com"
Radiocommunications (Electromagnetic Compatibility) Standard 2008 (AS/NZS CISPR 32)
class B
Radiocommunications (Short Range Devices) Standard
Radiocommunications (Electromagnetic Radiation-Human Exposure) Standard
EN | 18