Advertisement
mode after 10 seconds recording. When there is a moving object before
the lens, machines will start to video recording with red video indicating
lamp flashing. And when there is no moving object before the lens, the
system will stop video.
5. G-Sensors
The product has built-in crash sensors (G-sensor), if a serious vehicle
collision happened, recorder will be locked automatically in case of
covering. Also, you can manually press the button "
image.
6. Parking Detection
A. In the parking mode, the recorder will start to work automatically
when the car is shaking by external force. And then stop working
after the shaking 10-15s.
B. The video will be locked the file automatically under parking mode.
C.
Note: Parking detection is only working when the recorder close
automatically not by manually.
7. Date & Time
A. Start the machine, press "OK" button into standby mode.
B. Press button "
" twice, press
Date>, and then press OK button to enter.
C. Press
or
to set the time and date, after it's ok, press
exit.
" to lock the
or
to choose the <Time &
to
8. USB
Connecting the computer by the USB wire, the product will jump out
USB menu; you will have two choices as below:
A. Memory Unit: You can save and take the video and photo files from
here..
B. Camera: It will jump out the USB video equipment, you can use it as
PC camera to choose network photograph or video chatting.
9. Playback
A. If the machine is working on video recording, please press "OK" to
stop recording.
B. Press
into playback mode, you can see playback icon
C. Short press
or
button to confirm the file. Short press "OK" button to stop the video.
10. Battery
Full
Half
This device can be charged through connecting the USB terminal of
computer as well as connecting charger. Please use car power during
the daily working.
11. Reset
If there is abnormal or system halted happened, reset the system.
to choose the file, and then short press "OK"
Low
Empty
.
Advertisement
