Download Print this page

ATS NASA 2001 Operation Manual

Security system with local remote control for model pa2001-src

Advertisement

Quick Links

System Operation of ATS NASA 2001™
ATS NASA 2001 is an advanced car security system which provides three unique functions:
(1) Anti-theft Alarm
(2) Anti-carjacking
(3) Remote Control via Paging System
Security System with Local Remote Control for Model PA2001-SRC
1. Remote Arming
Pressing the key-chain transmitter button #1 (left hand-sided button) once momentarily will arm the system. The
alarm system will confirm it with 1 siren chirp. Also the parking lights will flash once. The LED will flash once
every three seconds.
2. Remote Disarming
Pressing the key chain transmitter button #1 once again momentarily will disarm the system. The system will
confirm it with 2 siren chirps. Also the parking lights will flash twice. The LED will go off.
3. Emergency Override Switch
In the case that the remote key-chain transmitter is lost or broken, you can disarm the system by using the
Emergency Override Switch with the following procedures:
(1). Open the door; the alarm will be activated and the horn will sound;
(2). Insert the ignition key and turn to the ignition "ON" position; and,
(3). Press the Valet/ Override button switch momentarily. The alarm will be disabled and the LED will be
turned off. The starter-disabled feature will be deactivated. This will allow you to start your car again.
After completing the procedures above, you have made the system enter into the RESET mode; the system will
return to passive Arming & Disarming mode. In other words, when the driver turns the ignition key to "OFF"
position, or removes the car key, the alarm system will automatically arm itself in the amount of EXIT time
previously selected in the "Programming Instructions" section of Installation Manual.
4. Valet Mode

SYSTEM OPERATION

Advertisement

loading
Need help?

Need help?

Do you have a question about the NASA 2001 and is the answer not in the manual?

Questions and answers

Summary of Contents for ATS NASA 2001

  • Page 1: System Operation

    SYSTEM OPERATION System Operation of ATS NASA 2001™ ATS NASA 2001 is an advanced car security system which provides three unique functions: (1) Anti-theft Alarm (2) Anti-carjacking (3) Remote Control via Paging System Security System with Local Remote Control for Model PA2001-SRC 1.
  • Page 2: Led Indicator

    ATS NASA 2001 is equipped with a Valet / Service Override switch which allows the vehicle operator to disable ATS NASA 2001 To get into the valet mode, first insert the car key into ignition, turn it “ON” and hold the push button switch for 3 seconds until the LED comes “ON”...
  • Page 3 arming feature is activated and you will hear the siren to confirm the operation with one chirp, i.e. you can now arm or disarm it with no chirps. To activate the chirps again it can be done by turning the ignition “ON” and pressing the button #2 momentarily; you will hear the siren to confirm an entry into the programming mode with 3 chirps.
  • Page 4 1. ATS NASA 2001 Monitoring Service in Canada In Canada, if you have bought and installed a ATS NASA2001, ple ase call (604) 931 2839 and ATS or Moupic ( tel: 604-299-6838) will offer you a toll-free number for one-year free monitoring service. After you sign a service monitoring agreement, the PIN number and Password (PW) number along with the command code of your choice will be provided to you.
  • Page 5 Within a couple of minutes, the car doors should electronically be unlocked! NOTE: We strongly suggest you try ALL of the Command Codes available to your ATS NASA 2001 before you use them! Get aquatinted with the system, the timing of the call and Que. of the system for you to enter the required numbers.
  • Page 6 Please consult your installer or local distributor...
  • Page 7: Troubleshooting Hints

    Verify operation of relay configurations as indicated in the Testing Section. When the unit is first connected to power, the ATS NASA 2001 will go into “Alarm Mode” horn starts sounding; the lights, flashing. when connected to power. This mode can be reset by turning “ON”...
  • Page 8 Customer Support We appreciate your business and would like to do everything possible to enhance your experience with our product. Should you encounter any problems or questions, please first contact the dealer that installed your system. If you continue to have issues and concerns, please contact our customer support at (604)-299-6838. You can also find more products from our website at http://www.moupic.com.