Page 1
Star Trac Fitness™ S-CTx Cross Trainer Install Guide...
Page 2
Install Guide STAR TRAC S-CTx CROSS TRAINER...
Page 3
Rubber Mallet Torque Wrench Phillips Head Screwdriver Your STAR TRAC S-CTx CROSS TRAINER includes a hex key set and combination open-end wrench. ASSEMBLY 1. Unpack and Position the Base CAUTION: The rear end of the base is very heavy. Two persons are needed to lift this end when moving the base.
Page 4
If needed, use the leveling adjusters at the rear of the base to level the unit. Loosen the lock nuts on the adjusters. Rotate the adjusters until the unit is stabilized, then retighten the lock nuts. You have now completed assembly of your STAR TRAC S-CTx CROSS TRAINER. Step 5...
Need help?
Do you have a question about the S-CTx and is the answer not in the manual?
Questions and answers