LOGIPIX IP VIDEO SURVEILLANCE SYSTEMS INSTALLATION GUIDE LOGIPIX ONE IP Camera Camera models: LPIX-ONE-DNI; LPIX-ONE-DNV Document version: 2.0 Contact E-mail: info@logipix.com Technical support: support@logipix.com Web: www.logipix.com...
Connecting the LAN....................12 Connecting the Power.....................12 Connecting the I/O ports..................12 The LED states......................13 Mount the camera on the mounting bracket (optional).........14 Connecting to the LOGIPIX Network Video Recorder........15 Camera Login....................16 Focus and Iris setup..................16 Setup the focus......................16 Setup the Iris......................18...
Installation Guide Important Information Please provide this manual to the owner of the equipment for future use. Follow the security instructions below and use the device only according to these to avoid any injuries, fatal accidents or material damage! • Recommended for indoor use. For outdoor use install the camera in a waterproof enclosure with built-in cooler and heater! •...
Page 4
Installation Guide • Our devices have been manufactured of excellent quality, recyclable materials. After service life, please do not dispose the devices to household waste! Put them into the designated electronic waste containers! • Before unpacking, please make sure the package is intact. If the package has damaged during the shipment, notify the shipping company! 4/18...
CD and DVD LOGIPIX Documentation Installation Guide (this document) Video Tutorials Software Printed materials LOGIPIX International Warranty Document Required Tools, Cables and Devices Task Tool / Cable / Device Lens (not included) 1” Standard C mount DC auto/manual IRIS, P-IRIS lens...
Installation Guide Cooling and heating In case of outdoor use, it is necessary to install the camera in a waterproof camera enclosure with built-in cooler and heater. Dimension 8/18...
Installation Guide Specifications Mechanical Dimension 71×53×66 mm (without lens) Weight 350 g, 0.77 lbs (without lens) Material Metal case Finish Powder coat, black Electrical Power source LPoE or 10-24 V DC Power consumption 7.2 W Power connector 2-pin terminal block Network Ethernet connection 1000 Mbit...
Page 10
Installation Guide Certifications ROHS Electromagnetic Emissions EN 55022:2010 Electromagnetic Immunity EN 55024:2010, EN 50130-4:2011, EN 61000-4- 2:2009, EN 61000-4-3:2006+A1:2008+A2:2010, EN 61000-4-4:2012, EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-8:2010 10/18...
Install the camera into a camera enclosure This step is optional but in case of outdoor use it is necessary. To install the LOGIPIX camera in an enclosure, follow the steps of the enclosure's user manual! 11/18...
Shielded Ethernet cables are required. The connector can be found at the back of the camera. Power supply of the camera can be provided over the Ethernet cable if it is connected to the LPoE router of the LOGIPIX NVR.
Installation Guide LOGIPIX ONE contains an RS485 port for serial communication. The spring connectors can be found at the back of the camera. (RSA and RSB) I/O Schematics The LED states • The LEDs are signed on the Rear view draw of the camera in this document.
Installation Guide Mount the camera on the mounting bracket (optional) The camera can be fixed on most of the standard camera consoles. The camera can be mounted on a console with its standard 1/4“– 20 thread. To install the mounting bracket and to fix the camera on it, please read carefully the manual of the mounting bracket! 14/18...
Installation Guide Connecting to the LOGIPIX Network Video Recorder Connect the CAT6 Ethernet cable of the LOGIPIX camera to one of the 8 Gigabit LPoE ports of the LNVR! The draw below shows the exact place of the ports (1-...
Connect your camera with the Ethernet cable to a notebook that has an installed SCPlayer on it. You can find the LOGIPIX camera’s IP address on a sticker. Start the SCPlayer program, and then connect to the camera by adding its IP address.
Page 17
Installation Guide LOGIPIX-ONE has a built-in ABF module wherewith the focus can be adjusted automatically. The ABF module changes the position of the sensor to find the right focus. • Regardless of the camera has an ABF module, the draft focus of it must be adjusted after physical installation.
Installation Guide that the program makes another scan around the max value in 400 steps to fine tune it. • If you've searched the focus manually by the slider, click on the Automatic fine tune button! The software will fine tune the focus automatically.