Honda Clarity 2018 Owner's Manual page 108

uuIndicatorsuDriver Information Interface Warning and Information Messages
Message
●
●
●
●
●
●
●
●
106
Condition
Appears after the driver's door is opened when the
power mode is in ACCESSORY.
Appears when the power mode is in ACCESSORY.
Appears when you close the door with the power
mode in ON without the smart entry remote inside
the vehicle.
Appears when the smart entry remote battery
becomes weak.
Appears if the smart entry remote's battery is too
weak to turn on the power system or the key is not
within operating range to turn on the power system.
A beeper sounds six times.
Appears when you set the power mode to
ACCESSORY or ON.
Canadian models
Appears after you unlock and open the driver's door.
Appears when the POWER button is pressed while
driving.
Explanation
Press the POWER button twice with your foot off the
●
brake pedal to change the power mode to VEHICLE
OFF.
—
Disappears when you bring the smart entry remote back
●
inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 160
Replace the battery as soon as possible.
●
2 Replacing the Button Battery P. 510
Bring the back of the smart entry remote into contact
●
with the POWER button.
2 If the Smart Entry Remote Battery is Weak P. 537
2 Turning on the Power P. 376
2 Emergency Power System Off P. 538