1. Manuals
  2. Brands
  3. EAST COAST Manuals
  4. Media Converter
  5. UDC-IC
  6. Operation manual

EAST COAST UDC-IC Operation Manual

Universal data converter interface converter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1.1
2.1
2.2
2.3
2.5
2.6
2.7
2.8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1
3.2
3.3
3.4
3.5
3.6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1
V.35 INTERFACE CHART

TABLE OF CONTENTS

. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
Page 1
Page 1
Page 2
Page 2
Page 2
Page 2
Page 2
Page 2
Page 3
Page 3
Page 4
Page 4
Page 4
Page 4
Page 5
Page 5
Page 5
Page 5
Page 6
Page 6
Page 7

Advertisement

Table of Contents
loading

Summary of Contents for EAST COAST UDC-IC

  • Page 1: Table Of Contents

    TABLE OF CONTENTS CHAPTER 1 - INTRODUCTION ..... . Page 1 FUNCTIONAL DESCRIPTION ....Page 1 CHAPTER 2 - PRODUCT OVERVIEW .
  • Page 2 OPERATIONS MANUAL UNIVERSAL DATA CONVERTER INTERFACE CONVERTER UDC-IC 22 November, 2010 FOR TECHNICAL SUPPORT CALL: East Coast Datacom, Inc. 245 Gus Hipp Blvd., STE 3 Rockledge, FL 32955 USA TEL: (321) 637-9922 FAX: (321) 637-9980 Email: info@ecdata.com Manufactured By East Coast Datacom, Inc.
  • Page 3 PROPRIETARY NOTICE The information contained herein is proprietary to East Coast Datacom, Inc. Any reproduction or redistribution of this publication, in whole or in part, is expressly prohibited unless written authorization is provided by East Coast Datacom, Inc.

  • Page 4: Chapter 1 - Introduction

    Port A. In all installations, Port B will always provide timing to Port A. The UDC-IC has status LED’s for each attached data interface which allows the user to visually confirm the presence of control signals. Additionally, the unit has options for clock and pass / force of common control signals.

  • Page 5: Chapter 2 - Product Overview

    Port A and Port B data interfaces. CLOCKING The UDC-IC must be externally clocked from PORT B. The unit has a clock option in the settings guide for: Port B EXTC from Port A TXC or Port B EXTC from Port B TXC.

  • Page 6: Data Interface Module Straps

    Using a phillips screwdriver, remove the top two screws of the DIM. Gently pull the module from the UDC-IC housing. It may be easier to remove the top cover and while holding the edges of the DIM, rock the DIM back and forth as you pull the DIM out of the socket.

  • Page 7: Chapter 3 - Installation

    Schurter, Inc. Part #'s are: 160ma = 034.3109 and 80ma = 034.3106 POWER CONNECTION Before connecting the UDC-IC to an AC power source the top cover should be installed with the supplied #4-40 screws. AC power is supplied to the unit through a 2.3m (6.6 ft) cord terminated by a grounded 3-prong plug.

  • Page 8: Default Configuration Switch Settings

    DATA PORT CONNECTIONS Before applying AC Power to the unit, the users cabling to the UDC-IC Data Interfaces should be connected. Straight through shielded cables should be used. PORT A must always have a DCE interface module plugged into the port and connect to a DTE device.

  • Page 9: 4.0 - Appendix

    UDC-IC INSTALLATION AND OPERATIONS MANUAL 4.0 - APPENDIX STRAP CHART UDC-IC Dip Switch settings DIP SWITCH SW2: Port B EXTC from Port A TXC Port B EXTC from Port B TXC Used Used Port A DSR follows Port B DSR...

  • Page 10: Technical Specifications

    Available in V.35, RS-530, RS-422/449, RS-232, X.21, HSSI, TTL, RS-485 and Serial Interface Cards, Two Cards Current Loop Required Per UDC-IC, pick one DCE and * other interfaces available by special order one DTE card. Data Format Synchronous or Asynchronous...

Table of Contents