Table of Contents
Advertisement
The PSR3000-54A power supply is provided with a 16 A AC power
cord with a C19 angled connector. You can also use a 16 A AC power
cord with a straight entry C19 connector.
To connect the power cord:
1.
Plug the AC power cord connector into the AC input receptacle
of the power supply.
2.
Use a removable cable tie or self-adhesive cable tie to secure
the power cord to the handle of the power supply.
Route the power cords of the left power supplies to the left side.
Route the power cords of the right power supplies to the right
side.
Figure 5 Securing the power cord with a C19 angled connector
by using a removable cable tie
9
Advertisement
Table of Contents
