Climax PSS-29ZBS Manual

PSS-29ZBS(R) / PSM-29ZBS(R) Power Switch Series
Introduction
The Power Switch series include the following models:
PSS-29ZBS: ZigBee Power Switch
PSS-29ZBSR: ZigBee Power Switch with Router function
PSM-29ZBS: ZigBee Power Switch with Meter
PSM-29ZBSR: ZigBee Power Switch with Meter and Router function
The Power Switches are capable of receiving wireless signals from the coordinator in the Zigbee network to
toggle On/Off of appliances that are attached to it.
The Power Switch utilizes ZigBee technology for wireless signal transmission. ZigBee is a wireless
communication protocol that is reliable, has low power consumption and has high transmission efficiency. Based
on the IEEE802.15.4 standard, ZigBee allows a large amount of devices to be included in a network and
coordinated for data exchange and signal transmission.
Models with Meter functions (PSM-29ZBS / PSM-29ZBSR) have the extra feature of keeping tracks of energy
consumption with built-in power meter and transmit the data to coordinator regularly.
Models with router function (PSS-29ZBSR / PSM-29ZBSR) also serve as a router in the ZigBee network. After
being included in the ZigBee network, it allows other ZigBee device to join the network through the Power Switch.
Model No.
PSS-29ZBS
PSS-29ZBSR
PSM-29ZBS
PSM-29ZBSR

Parts Identification

1. Function Button aka LED indicator
The Function Button also doubles as the LED Indicator. The function button is used to
control the Power Switch. The LED indicator is used to indicate Power Switch status.
LED Indication:
The LED indicator lights up in the following conditions:
- On:
The Power Switch is turned on.
- Off:
The Power Switch is turned off.
- Flashes twice:
The Power Switch has successfully joined a ZigBee network.
- Flashes 5 times
The Power Switch has successfully bound with a controller
- Flashes every 20 minutes
The Power Switch has lost connection to its current ZigBee network
(PSS-29ZBS and PSM-29ZBS only)
Function Button Usage:
- Press the button to toggle on/off the Power Switch
- Press and hold the button for 10 seconds then release to reset the
Power Switch.
- Press and hold the button for 3 seconds then release to bind with a
controller
ZigBee Network Setup
Z i g B e e D e v i c e
Z i g B e e D e v i c e
Meter ZigBee Router
No
No
Yes
Yes
G u i d e l i n e
G u i d e l i n e
No
Yes
No
Yes
1