Important Notice - Powerware BestLink IPK-0319 User Manual

Important Notice

Please read this notice if you are using an external BestLink Adapter
with a Unity/I Three-Phase UPS
If you are using an external BestLink Adapter, part numbers IPK-0318 or IPK-0319, please contact the Help Desk (see
page 33) to receive a DB-9 to DB-25 adapter (INT-0012) at no charge.
Connect the DB-9 to DB-25 adapter (INT-0012) to the X003 port on the Unity/I Three-Phase communications interface
board. After you have completed the configuration of the BestLink Adapter using the interface cable labeled "PC," move it
to the port on the BestLink Adapter labeled "UPS" and connect the opposite end to the DB-9 to DB-25 adapter. Reset the
BestLink Adapter to ensure that it properly establishes communication with the UPS.