KOOGEEK S1 Manual page 9

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic is affected by absorption and reflection from structures,
objects and people.
a
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios,
amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the
electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field
strength in the location in which the
SF-371 body fat scale
may be necessary, such as reorienting or relocating the
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3V/m.
Recommended separation distances between portable and mobile
RF communications equipment and the EQUIPMENT or SYSTEM -
for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
portable and mobile RF communications equipment and the SF-371 body fat scale
SF-371 body fat scale
The
controlled. The customer or the user of the
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the
fat scale
as recommended below, according to the maximum output power of the communications equipment
Rated maximum
output of
transmitter
W
0.01
0.1
1
SF-371 body fat scale
should be observed to verify normal operation. If abnormal performance is observed, additional measures
SF-371 body fat scale
Recommended separation distances between
is intended for use in an electromagnetic environment in which radiated RF disturbances are
SF-371 body fat scale
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
3 5 .

d [ ] P
V
1
/
/
/
is used exceeds the applicable RF compliance level above, the
.
can help prevent electromagnetic interference by
m
80 MHz to 800 MHz
3 5 .

d [ ] P
E
1
0.12
0.38
1.2
SF-371 body
800 MHz to 2.5 GHz
7

d [ ] P
E
1
0.23
0.73
2.3