Summary of Contents for Swarts Tools SW3006
- Page 1 INSTRUCTION BOOKLET Wet & Dry Shop Vacuum Part No. SW3006 PLEASE READ CARE AND SAFETY INSTRUCTIONS BEFORE USE...
- Page 2 SPECIFICATION Item Number: SW3006 Function: Wet & Dry Rated Voltage: 220-240V/50Hz; Rated Power: 1400W Capacity: 35L Air Flow Rate: 1.7 - 1.9 m³/min Tank Diameter: 410mm Vacuity: 16 - 19KPa Noise: 78-80dB(A) Hose Diameter: 32mm Hose Length: 1.5m Power Cord Length: 4m...
-
Page 3: Safety Instructions
5. Check the power cord, plug and switch before each use. If they are damaged in any way, the product must be marked and returned to Swarts Tools for repair. Do not ever attempt repairs on this product yourself as it is dangerous and you will be voiding your warranty. - Page 4 INSTRUCTIONS TO USE AS A STANDARD VACUUM CLEANER 1. Insert the end of the flexible grey hose into the front portal of the vacuum cleaner until the two rings touch together. 2. Twist clock-wise until the hose is locked in place. 3.
- Page 5 USE OF FLOOR CLEANING ATTACHMENTS These attachments can be used on linoleum, tiles, timber, concrete or carpeted floors. Different surfaces may or may not require these attachments. For example, carpeted surfaces may require the brush attachment and smooth surfaces may require the flat attachment.
- Page 6 CLEANING THE HEPA FILTER Periodically, you will need to clean the HEPA filter as it may become clogged with dust and debris. 1. Turn the product off at the power point. 2. Release the two plastic clips situated on either side the drum by pushing them in an outward direction. 3.
- Page 7 1. ON/OFF Switch 2. Vacuum Intake 3. Drain Plug 4. Fine Dust Bag 5. Telescopic Arm 6. Telescopic Arm Release 7. Suction Reduction Cap 8. HEPA Filter 9. Power Cord Holder 10. Blower Output INSTRUCTION BOOKLET INSTRUCTION BOOKLET...
- Page 8 PLEASE READ CARE AND SAFETY INSTRUCTIONS BEFORE USE PLEASE READ CARE AND SAFETY INSTRUCTIONS BEFORE USE...
Need help?
Do you have a question about the SW3006 and is the answer not in the manual?
Questions and answers