Page 1
MIST DECORATIVE LAMP WITH ESSENTIAL OIL DIFFUSER OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damages. Keep these instructions for future reference. INFORMATION ON PROPER DISPOSAL OF THE APPLIANCE IN COMPLIANCE WITH EUROPEAN DIRECTIVE 2002/96/EC.
Page 2
GENERAL OPERATING AND SAFETY INSTRUCTIONS The diffuser contains a high-output cold mist nebuliser: only use the nebuliser provided and follow the operating instructions carefully. Any other use not recommended by the manufacturer may cause fire, electric shock or malfunctions. ...
Page 3
HOW THE APPLIANCE OPERATES As a result of ultrasonic technology, this RGB LED appliance produces a cloud of concentrated, cold mist illuminated by an array of colours that continually shift and change. Mist is dispersed into the surroundings. Adding just a few drops of scented essential oil to the water disperses a pleasant fragrance throughout the room. Use clean water and add the desired oils to the water tank ensuring the appliance is filled to the minimum level as indicated by the nebuliser sensor: do not use chemical products.
Page 4
OPERATING INSTRUCTIONS ASSEMBLING THE PARTS PROVIDED Place the plastic support inside the lamp Place the RGB LED integrated nebuliser into the space provided by the plastic support (previously positioned inside the lamp). See picture 8 above for the correct assembly procedure. HOW THE APPLIANCE WORKS ...
Page 5
HOW TO REPLACE THE CERAMIC DISC Unplug the appliance from the mains supply and empty the contents of the water tank. Dry the mist production aperture thoroughly as the disc to be replaced is located here. Insert the turnkey into the protection mechanism and turn anticlockwise. Remove the protection mechanism and take out the worn disc.
Need help?
Do you have a question about the Aiko and is the answer not in the manual?
Questions and answers