Advertisement
WATER HEATER CONTROL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
From the home screen, press
Select the setting required:
For standard heat up - select
WATER HEATER TIMED BOOST (ideal for shower time)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Select the setting required:
or
or
The water will heat up quickly for
15, 30, 45 or 60 mins, (see Setting Other
Options for information on adjusting the Boost timer), then will
automatically resume the previous heat setting.
Return to home
WATER HEATER FROST PROTECTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To protect the water heater (only) from damage in cold temperatures.
To enable Frost Protection to prevent freezing at low temperatures, press
When selected, Frost Protection will activate when the temperature in your
vehicle falls below 6°C,
Frost Protection operates using the lowest electrical setting (or if mains is not
connected, it will use gas) as a power source.
Please note: Frost Protection will only activate if mains electric or a gas power
source is both connected and turned on. If mains or gas is not connected, the
Water Heater will 'lockout' and all settings will deactivate.
For more information on clearing lockouts - see Troubleshooting section.
Frost
Setting On
Water
Temperature
Electric setting
indicates that Frost Protection is ready.
WATER HEATER ICON
Fault Indicator
Timer in use
Gas in use
Advertisement
