I.O.M - SUBMERSIBLES - LBV SERIES SINCE 1981 TABLE OF CONTENT PRIOR TO OPERATION........................1 CARE UNdER OPERATION......................1 CARE AFTER OPERATION......................1 APPLICATIONS...........................1 TROUBLE SHOOTINg........................2 SERVICE ANd WARRANTY......................3 TECHNICAL SPECIFICATIONS....................3 PARTS LIST LBV 40 - 75............................4 LBV 215 - 315............................5 SLIdE RAIL COUPLINg.......................6-9 HISTORY Flo Fab was established in 1981 by Denis Gauvreau who created and developed the products line and constantly being perfected by Marc Gauvreau, as well as by a team of professional engineers and desi-...
I.O.M - SUBMERSIBLES - LBV SERIES SINCE 1981 1. PRIOR TO OPERATION 1.1. Be sure to provide an adequate grounding and install with leakage breaker to prevent the users from serious electric shock injury. 1.2. Make sure the voltage of the power supply are identical to the indications of the nameplate (label) on the pump.
I.O.M - SUBMERSIBLES - LBV SERIES SINCE 1981 5. TROUBLE-SHOOTINg To prevent serious accidents, disconnect the power supply before inspecting the pump...
I.O.M - SUBMERSIBLES - LBV SERIES SINCE 1981 6. SERVICE ANd WARRANTY If you can not find the reasons of the problem, please consult the authorized local dealer or company from which the pump was purchased. The pump has a 1 year warranty from the invoice date. Invoice is required for any warranty work. 7.
I.O.M - SUBMERSIBLES - LBV SERIES SINCE 1981 9. SLIdE RAIL COUPLINg Notice to installing contractor: Instructions must remain with installation. GENERAL INFORMATION These models are complete systems used in sewage or dewatering installations with side outlet flanged pumps. They can be used in basins of 1 Oft depth (for deeper depths, consult factory). The guide rail systems are particularly useful when the liquid level is above the pump discharge pump.
Page 9
I.O.M - SUBMERSIBLES - LBV SERIES SINCE 1981 9. SLIdE RAIL COUPLINg INSTALLING RAIL SYSTEM PARTS (Fiberglass Basin) Discharge Elbow Base, Discharge Piping and Guide Rails: Determine proper length required for discharge piping. Connect discharge piping to elbow base. Lower the discharge piping/elbow base assembly into the basin. Position the elbow base by dropping a plumb line from the center of the guide rail pins located on the upper guide rail bracket to the center of guide rail pins protruding from the elbow base. Level the elbow base flange in two directions...
Page 10
I.O.M - SUBMERSIBLES - LBV SERIES SINCE 1981 9. SLIdE RAIL COUPLINg...
Page 11
I.O.M - SUBMERSIBLES - LBV SERIES SINCE 1981 (if required)
Page 14
121 de la Pointe N Road- 37783 Co Rd 144, Verdun, Québec, Canada Clarksburg, CA, Sales and Service : Quebec, Canada Lake Worth Tel. : (450) 621-2995 Florida, USA Fax : (450) 621-4995 33467-5749 Toronto, Canada Tel. : +1 (647) 544-2995 www.flofab.com 24/7 SERVICE parts@flofab.com...