AmazonBasics Micro Instruction Manual page 5

Note: Your speaker stays in pairing mode for 3 minutes or
until you pair a device. If you do not pair a device within
3 minutes, your speaker exits pairing mode and the LED
ashes slowly. To start pairing mode again, press the
function button once.
Pairing another device or reconnecting to a paired device
1. Disconnect from the previous device by pressing and
holding the function
sounds, the LED blinks quickly, and your speaker enters
pairing mode.
2. Repeat the pairing steps for your next device.
Note: You can pair multiple devices but you can only have one
device actively paired at a time.
6
button for 1 to 3 seconds. A tone