Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Sebo 1600230
- Page 1 ® SeBo BV Interior & Equipage User's Manual Horse blanket drying rack SINGLE DRYING RACK FOUR-FOLD DRYING RACK EU TYPE 1600230 EU TYPE 4600230 US TYPE 1600115 US TYPE 4600115 Version: Edition : 01/11/2016 manual of horse blanket drying rack...
-
Page 2: Table Of Contents
We advise you to contact your supplier for the period and conditions with respect to guarantee. We moreover refer to our General Terms and Conditions of Sales and Delivery which can be obtained upon request. SeBo Interior & Equipage B.V. may not be held liable for any damage or injury as a result of not adhering closely to this manual and not taking into account usual caution while transporting, assembling, using and maintaining this horse blanket drying rack. -
Page 3: Introduction
1. Introduction Congratulations on the purchase of your electric horse blanket drying rack This user's manual provides the important and necessary information about mounting and using your horse blanket drying rack. We will try to take you through this manual thoroughly, so that you are entirely aware of the contents of this manual. - Page 4 2. Safety measures and warnings (continued) Location: • The electric horse blanket drying rack is only intended for application in a well-ventilated space. A non- ventilated space may lead to overheating. • Do not expose the drying rack to rain, snow, spray, excessive pollution and condensing conditions. •...
- Page 5 2. Safety measures and warnings (continued) User: • The blanket drier only needs to be used by people who are fully aware of what is in this user's manual. • The blanket drier is not suited for use by children and people with a bodily, psychic or sensory handicap.
- Page 6 2. Safety measures and warnings (continued) • NOTE! Only use and tilt the drying rack if it has been switched off and is sufficiently cooled off. • Warning! NEVER leave the drying rack unattended during use of cooling off. Also never use the drying rack with an external voltage regulator like a dimmer, etc.;...
- Page 7 Dispose of the product in accordance with local legislation and regulation. • SeBo Interior & Equipage B.V. does not accept any liability whatsoever for any damage or injury as a result of not (strictly) observing the safety regulations and instructions in this manual, or of neglecting while transporting, assembling, using and maintaining this product and any accompanying accessories.
-
Page 8: Product Description
3. Product description 3.1 Product description The electric horse blanket drying rack is an electrically heated pipe radiator intended for drying (non- flammable) horse blankets, breeches, saddle pads, and tendon boots. This drying method increases the life cycle of the blankets, prevents mould and unpleasant odours. The drying rack concerns a system which can be turned and inclined, due to which horse blankets can be placed ergonomically and easily. -
Page 9: Overview Of Functions
3.2 Overview of functions The functions of the (single) drying rack are presented below. Automatic venting (upon 1st use) Grip (for tilting) Drying rack Element Locking pin (against tilting) Filler Adjustin Power Supply g bolt Foot switch Floor mounting holes Clamp for backrest part Hinge... -
Page 10: Dimensions
3.3 Dimensions The dimensions of the (single and four-fold) drying rack are presented below. The measurement is in cm. 87.5 1 RACK 4 RACKS 206.7 You can set up the drying rack by simply turning it around the vertical axis. manual of horse blanket drying rack... -
Page 11: Parts Overview
4. Parts overview 4.1 Exploded-view & parts list of single drying rack N.B. Always check the delivery slip of the delivered parts well for quantity and quality. Any visible defects need to be indicated within 7 days after delivery in writing. Description Quantity Composition of switch block... -
Page 12: Exploded-View & Parts List Of Four-Fold Drying Rack
4.2 Exploded-view & parts list of four-fold drying rack N.B. Always check the delivery slip of the delivered parts well for quantity and quality. Any visible defects need to be indicated within 7 days after delivery in writing. Description Quantity Composition of switch block Switch block PCB printed board 1... -
Page 13: Technical Specifications
5. Technical Specifications Single drying rack Four-fold drying rack Voltage EU AC 230 V 50/60 Hz AC 230 V 50/60 Hz Voltage U.S. 115V 115V Power 600 W 2400 W Weight 20 kg 20 kg Dimensions standing (LxBxH) 97x30x226 cm 97x87.5x226 cm Dimensions tilted (LxBxH) 206x30x97 cm... -
Page 14: Mounting Preparation
6. Mounting preparation 6.1 Overview of tools Below is an overview of the required tools. Ø8 manual of horse blanket drying rack... -
Page 15: Pre-Mounting Switch Block Onto Foot
6.2 Pre-mounting switch block onto foot. SINGLE DRYING RACK Mount the single switch block with 4 M6x20 socket-head bolts on the front and rear sides of the foot. 4 wire bridges are fixed in the switch block. FOUR-FOLD DRYING RACK Mount the four-fold switch block with 4 M6x20 socket-head bolts on the front and rear sides of the foot. -
Page 16: Surveying & Determining Position
6.3 Surveying & determining position 1. Place the drying rack removed from other articles. Ensure that the drying rack has at least about 50 cm free space in both the standing and tilted position. Always place the drying rack at an easily reachable place so that the device and be switched off “quickly and easily”. -
Page 17: Mounting
7. Mounting 7.1. Mounting the foot to the floor N.B. The kind of means of fastening for floor mounting depends on the type of surface (steel, concrete or wood). The means of fastening need to be determined by the installer and are not delivered by default. -
Page 18: Placing The Drying Rack
7.2 Placing the drying rack 1. Place the drying rack with the hinge over the conical recording pin of the foot. NOTE! The cable of the heating element needs to be at the front of the tilting side. Place the plug (18) of the heating element in the contact found at the bottom of the switch block (in line with the drying rack). -
Page 19: Connecting Plugs
7.3 Connecting plugs NOTE! Check whether the voltage, indicated on the heating element, corresponds to the voltage of the electrical point to which you want to connect. Only use the drying rack in sockets provided with a protective earth switch. Ensure that the cables do not hang over (sharp) edges, do not make any sharp bends, cannot be towed and do not touch any hot surfaces. -
Page 20: Commissioning And Operation
8. Commissioning and operation 8.1 Switching the drying rack on and off The switch block is easy to operate with a foot switch. With it, each rack can be switched on and off separately. Switching on 1. Place the power plug into the mains socket. 2. -
Page 21: Ventilating Before First Use
8.2 Ventilating before first use NOTE! The drying rack needs to be well vented before first use. NOTE! No blanket, etc., needs to be placed onto the drying rack at the time of first use. NOTE! Always wear gloves when venting, and use a cloth. Ensure that the heating fluid Bio-CV-Fluid does not come into contact with your clothes or parts of your body. -
Page 22: Tilting Drying Rack
8.3 Tilting drying rack The drying rack can be used after ventilating. NOTE! The drying rack becomes extremely hot during use (up to 90ºC). Use only the grips intended for the purpose. Do not touch the drying rack itself if it is hot or in use. Touching it may result in burns to the body, clothing or other sensitive materials. -
Page 23: Clamping Horse Blankets Onto Drying Rack
8.4 Clamping horse blankets onto drying rack You can simply clamp your horse blanket onto the drying rack, so that it continues to remain in place while tilting and drying. NOTE! NEVER put inflammable materials on the drying rack, the drying rack is hot and may cause bald spots and fire. -
Page 24: Tilting Back Drying Rack And Switching It On
8.5. Tilting back drying rack and switching it on Check whether the horse blanket is correctly positioned on the drying rack. And ensure that all buckles, hook fasteners, flaps, etc., have properly tucked in, so that they cannot get entangled when the rack tilts. -
Page 25: Tilting Drying Rack With Dry Horse Blankets
8.6 Tilting drying rack with dry horse blankets 1. If your horse blanket is dry, switch the drying rack OFF by tapping on the foot switch gently with your foot. The light of the switch is off. 2. Pull the power plug from the mains socket if you will no longer be using the drying rack hereafter. 3. -
Page 26: Taking Off Horse Blankets From Drying Rack
8.7 Taking off horse blankets from drying rack If your horse blanket is dry and has cooled down, you can take it off the drying rack. NOTE! NEVER place a horse blanket immediately from the drying rack onto your horse. This could cause burns. -
Page 27: Tilting Back Drying Rack And Switching It Off
8.8. Tilting back drying rack and switching it off 1. Take the grip of the drying rack with 2 hands and tilt it back to the vertical position. 2. Set the lock pin and tighten the adjusting bolt so that the drying rack cannot tilt free. 3. -
Page 28: Faults
9. Faults If you notice shortcomings, a fault or leak when using the drying rack, then immediately deactivate put the drying rack and cut off the power connection. There is risk of fire, injury or damage in that instance. The heating element of the drying rack is equipped with overheat protection. As soon as the radiator fluid reaches the temperature of 90°C, the fuse switches off the heating element to prevent further increase in temperature. -
Page 29: Maintenance And Cleaning
10. Maintenance and cleaning We recommend that you clean the drying rack regularly. Always let the drying rack cool off before cleaning it. NOTE! Remove the tension from the device before you clean the drying rack for your own safety. NOTE! It is not allowed to clean the drying rack when it is being used, in view of the high temperature that the drying rack can reach. -
Page 30: Attestation Of Compliance
The Netherlands Declares with some responsibility that the product electric horse blanket drier, a device with which horse blankets can be dried Item number: 1600115 1600230 4600115 4600230 Is compliant with the following standards: Machine directive 2006/42/EC. Low voltage directive 2006/95/EC. -
Page 31: Waste Disposal
12. Waste disposal Dispose of the product in accordance with local legislation and regulation. 13. Guarantee conditions Guarantee as per the guarantee conditions and general conditions of SeBo Interior & Equipage B.V. They can be found on the website www.sebointeriorequipage.com 14. Contact Your dealer is your first point of contact in case of questions and comments.