Convision CC-5201 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Manual

CC-5201

Date: January 2011

Convision Systems GmbH

Manual CC 5201

Table of Contents

Need help?

Do you have a question about the CC-5201 and is the answer not in the manual?

Questions and answers

Summary of Contents for Convision CC-5201

Page 1 Manual CC-5201 Date: January 2011 Convision Systems GmbH Manual CC 5201...
Page 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Page 3  Warning The camera requires periodic inspection. Contact an authorised technician to carry out the inspection. Stop using your camera when you find it malfunctioning. If the camera emits smoke or is unusually hot for a long period, a fire may be caused. Do not install the camera on a surface that can not support it.
Page 4: Table Of Contents
Contents NOTICE Important Safeguard Precautions Features Components and Accessories Overview Front View Dimensions Side View Bottom View Rear View Installation Procedure Lens Using an Auto Iris Lens Using a C/CS mount Lens Connecting to a Monitor Connecting to Power Control via the RS-485 Interface Camera Operation Menu Switch...
Page 5: Notice
 NOTICE Important Safeguard 1. Read Instructions Read all of the safety and operating instructions before using the product. 2. Retain Instructions Save these instructions for future reference. 3. Attachments / Accessories Do not use attachments or accessories unless recommended by the appliance manufacturer as they may cause hazards, damage product and void warranty.
Page 6: Features
 Features Ultra High Resolution By adopting a 410,000 pixel Sony CCD, the Privacy Function camera produces clear picture quality with The Privacy function conceals the areas a horizontal resolution of 540 TV lines for you do not whish to appear on the screen. colour and 570 TV lines for B/W.
Page 7: Components And Accessories
Components and Accessories  1. Day & Night CCD Camera 2. Auto Iris Lens Connector Plug 3. C-Mount Adapter 4. Instruction Manual  Overview Front View 1. Tripod Mounting Bracket Screw Hole Used to fix Tripod Mounting Bracket to the top of the camera 2.
Page 8: Side View
Side View 4. Auto Iris Lens Connector Used to connect Auto Iris Lens plug. Bottom View 5. Tripod Mounting Bracket Screw Hole Used to fix the camera onto a bracket or tripod. The screw sizes for this hole are as follows: The Tripod Mounting Bracket can be unscrewed and installed on the top or bottom of the camera.
Page 9: Rear View
Rear View 6. OSD Setup Buttons Set Button: Displays the menu on the screen. Press this button to confirm status or after changing a selected item. Up and Down Button: Used to move the cursor up and down in the menu screen to select a desired menu item.
Page 10: Installation Procedure
Installation Procedure  Lens The lens is not supplied with this camera. Purchase a lens suitable for the environment. This camera accepts an auto iris lens and both C-and CS-mount lenses. Note  It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major functions of this camera.
Page 11: Using A C/Cs Mount Lens
4. Fit the cover of the auto iris lens connector plug, remove the protective CCD cover from the front of the camera and fasten the Auto Iris Lens by turning it clockwise. 5. Focus the camera using the Auto Iris Lens controls, combined with fine adjustment using the Back Focus control.
Page 12: Connecting To A Monitor
 When Using a C-Mount Lens 1. Remove the protective cover at the front of this product and fit the C-Mount Adapter, turn it clockwise to install it. 2. Turn the C-Mount lens clockwise to install it. 3. Focus the camera using the C-Mount Lens and Back Focus controls. 4.
Page 13: Connecting To Power
 Since the connection procedure may differ depending on the type of monitor or peripheral device to be connected, refer to the User Manual for the device to be connected.  Make sure to turn off the device to be connected before making any connections. ...
Page 14: Control Via The Rs-485 Interface
Control via the RS-485 Interface The camera can be controlled by using an external controller equipped with RS-485 communications.  To control using a DVR or keyboard controller Connect the RS-485 cable (TRX+, TRX-) to the connection port of the 485 control board in the DVR or controller. 485 Control Board Connection Port RS-485 Control Port (+) CONNECTION TERMINAL (TRX+)
Page 15: Main Menu
Left / Right: Sub Menu On or Decision When OSD Menu is Off and Pan/Tilt is On, operate by Up, Down, Left, Right Motion Detect becomes invalid while moving Pan/Tilt. Main Menu - Exposure, White Bal, Day/Night, Motion, Privacy, Option and Display has a Sub Menu; UP / DOWN Cursor.
Page 16: White Balance
 OFF: Deactivates DNR. Noise is not reduces.  ON: Activates DNR so that noise is reduced. Return: It returns to the Main Menu. White Balance WB Mode: ATW, AWC, MANUAL can be selected Red Cont: When it is Manual, 0 to 127 can be selected. Another becomes NOT USE Blue Cont: When it is Manual, 0 to 127 can be selected.
Page 17: Privacy
o Motion Area A thick gray shows the cursor When it is transparent, the area becomes effective * Default is ALL transparent, it is All effective. When it is light gray, the area becomes invalidity Cursor moved by LEFT or RIGHT When UP or DOWN is pushed, it becomes effective or invalid MENU is returns to the MOTION * BLC automatically becomes effective on this screen.
Page 18: Option
Option Title: Title is displayed Nega/Posi: Nega or Posi can be selected Sharpness: 0 to 15 can be selected Mirror: Normal, Mirror, Vertical, Rotate can be selected Zoom: Off (x1) and On 1 to On 8 (x4) can be selected When PAN / TILT is ON, it is NOT USE.
Page 19: Display
o Position Title position is changed by UP, DOWN, LEFT, RIGHT Menu is returns to the Title Display Title: Off or On can be selected Motion Det: Off or On can be selected Camera ID: Determines the cameras identification number. (between 0 and 255) Baud Rate: You can select 2400/9600 pbs.
Page 20: Troubleshooting
Troubleshooting  If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problems Troubleshooting Nothing appears on the screen. • Please check the power connection. •...
Page 21: Specifications
 Specifications ITEM NTSC Sensor ½” Ex-view color CCD ICX 428AKL ICX 429AKL Number of Pixel 768 x 494 752 x 582 Scanning 2:1 Interlace Synchronization Internal Horizontal: 15.734 KHz Vertikal: Horizontal: 15.625 KHz Frequency 59.94 Hz Vertikal: 50.00 Hz Resolution 540 TV Lines: Colour 570 TV Lines: B / W...