ALLY AR1900L User Manual

Let's Get Started
AR1900L/ART19B/AEX1900L/AEXT19B
What You Need
ALLY Router
ALLY Extender
Ethernet Cable
Power Adapters
Not in the box:
Android or iOS device with Internet
Broadband Modem
© 2017 Amped Wireless / Newo Corporation. All rights reserved.
1 Download the App
Download the Amped Wireless ALLY app on your
Android or iOS device. Search for ALLY Whole Home
Wi-Fi System on the Google Play or Apple Store, or visit
ampedwireless.com/allyapp. We support Android 4.4+
and iOS 9+.
2 Create Your Account
Open the App and create your account. The account
allows you to securely manage your ALLY from anywhere
and from any device.
3 Set Up Your ALLY
Follow the steps in the app to get your ALLY up and
running. Once ALLY is on, go to your phone's Wi-Fi
settings and connect to Amped_ALLY_XXXX. This will
allow the app to verify and prepare ALLY for the next
step. Return to the ALLY app after you've connected.
4 Create Your Wi-Fi Network
At the end of the setup, you will be asked to create a
name and password for your new Wi-Fi networks.
Tip: The 5GHz network is faster than the 2.4GHz
network, but a 2.4GHz will have more range.
5 Connect Devices & Explore the App
Your Wi-Fi is now up and running. Connect devices to your new network and add
User Profiles. Also, check out ALLY's security and parental control features.
Settings
Check for updates, change
Wi-Fi passwords and more
Users
See and create user profiles
Devices
View and block connecting devices
Activity
Get a glance of recent
network activities
1
6 Set Up Your ALLY Extender
1. Find a spot halfway between your ALLY Router and the far end of your
home. If you have a two story home, it is recommended that your ALLY
Router and ALLY Extender are on opposite floors.
2. Power on the ALLY Extender using the included power adapter with the
yellow sticker.
3. Wait about 3 minutes, or until the LED stops blinking and turns a solid
green, orange or red. If the light is green or orange, then you've found a
good spot. If the light turns solid or blinking red, then the ALLY Extender is
too far from the ALLY Router. Move it closer and try again until the light
turns solid green or orange.
Network Settings
Internet
AVG Protection
Modem ALLY ALLY
Guests
Router Extender
Create a guest network
Updates
Check for app or
firmware updates
Internet
Modem ALLY ALLY
Router Extender
2
Do This
When the LED is solid green,
the Extender is placed in a good
spot. Orange is sufficient, but
green will perform better.
Not This
When the LED is red, the Extender
is too far from Router and will not
work. Move it closer.
3