Table of Contents
Advertisement
SETTING UP THE SHOOTING FUNCTION
SHARPNESS
In the STILL PICTURE mode, you can select picture sharpness.
Select the desired SHARPNESS (SOFT/ NORMAL/ HARD) depending on the subject matter.
1.Turn the camera power on.
2.Rotate the mode dial to STILL PICTURE mode.
3.Do not turn the LCD monitor off.
4.Press the MENU button to display the menu on the LCD
monitor.
5.Press the DOWN button(
6.Shift the cursor by pressing the RIGHT button (
[SHARPNESS] sub menu.
7.Select the desired sub menu by pressing the UP (
DOWN (
) buttons. The default is NORMAL.
8.After selecting the desired sub menu, press OK button to
confirm the setting.
9.Press the MENU button to cancel the menu display.
Reference
Explanation of SHARPNESS sub menu
SOFT : This gives smooth edges and the final picture will have a soft appearance.
NORMAL : This setting will give a standard finish to the final picture.
HARD : This will give the picture a crisp and clear appearance.
42
) and select [SHARPNESS].
) to the
STILL PICTURE
SIZE
QUALITY
SHARPNESS
EFFECT
BACK :
) /
< STILL PICTURE mode >
1/2
SOFT
NORMAL
HARD
SET : OK
Advertisement
Table of Contents
