Page 5
RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use Notice: this radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards.
Page 6
Note: RF exposure decrease with increasing distance from the antenna. To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in the above standards and guidelines, users should transmit no more than 50% of the time and always adhere to the following procedures; and should transmit no more than 50% of the time, although the hardware support transmission up to 100% of the time in analog mode and up to 50% in digital mode.
Need help?
Do you have a question about the SPM6000 Series and is the answer not in the manual?
Questions and answers