Advertisement
Wi-Fi Mobility Storage Car Charger
Device Layout:
Safety Hammer
Charge Head
Novice Road:
InStall the TF card
Before using, please insert TF card, then put the S6 in the car.
Turn on the S6
While the S6 power light (red LED) and Wi-FI signal light (green LED )will
light ,wating until the Green LED flashing, means the S6 benning turn on rightly.
Mobile App installation
For Apple users:
Method (1): Search for "ISeeStar" in the "App Store" to download and install the
app.
Method (2) :Scanning QR code For ios outside the package, then auto link to the
"App Store" download and install the "ISeeStar" app automaticly.
Method (3): Import the download address as following in your phones' IE, then
to download and install the app.
S6 Quick Start Guide
TF Card Slot
Reset Hole
1
Discharge Port/USB Port
Power light
Wi-Fi Signal Light
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Ameristar S6
- Page 1 Before using, please insert TF card, then put the S6 in the car. Turn on the S6 While the S6 power light (red LED) and Wi-FI signal light (green LED )will light ,wating until the Green LED flashing, means the S6 benning turn on rightly.
- Page 2 APP use steps of Apple phone Using apple App to access the S6 Step1: Please confirm the S6 turn on correctly at first. Step2: Enter the phone ”settings” menu, click the “Wi-Fi” menu to enter the Wi-Fi network selecting interface.(apple picture 1) Step3: Select the network name which start with of the ”Mpp”...
- Page 3 Step 6: The ISeeStar will enter the main browsing interface as figure 5,if the previous steps are all executed correctly. Step7: ISeeStar will dispaly as figure 4,if ISeeStar failed to connect to the S6. If ISeeStar connect to the S6 correctly . The cotents are about the root directory and file of the S6 in it’...
- Page 4 APP use steps of Android phone Use Android App to visit the S6 Step1: Please confirm the S6 turn on correctly at first. Step2:Enter the phone ”settings” menu, click the “Wi-Fi” menu to enter the WiFi network selecting interface. (android picture 1) Step3: Select the network name which start with of the ”Mpp”...
- Page 5 Step7: ISeeStar will dispaly as figure4, if ISeeStar failed to connected to the S6 . If ISeeStar connect to the S6 correctly . The cotents are about the root directory and file of the S6 in it’ main browsing interface.
- Page 6 Please stop to use the S6 when it work over hot. Do not pull a wet hand to pull the S6 or pull out the charging cable. You had batter pull out the S6 when you parking flameout , avoid to cause the battery power extra wasting.
- Page 7 FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the S6 and is the answer not in the manual?
Questions and answers