Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for COP-USA AU40M
Summary of Contents for COP-USA AU40M
- Page 1 3 Axis Joystick Keyboard Manual V1.0...
-
Page 2: Table Of Contents
CONTENTS SUMMARY -------------------------------------------------------------------------------------------------------3 SPECFICATION --------------------------------------------------------------------------------------------------3 TECHNICAL PARAMETER -----------------------------------------------------------------------------------3 REAR PANEL -----------------------------------------------------------------------------------------------------3 FRONT PANEL-------- -------------------------------------------------------------------------------------------4 EXTERNAL CONNECTION -----------------------------------------------------------------------------------4 OPERATION SPECIFICATION---------------------------------------------------------------------------------4 KEYBOARD OPERATION -------------------------------------------------------------------------------------5 TROUBLESHOOTING -----------------------------------------------------------------------------------------14 - 1 -... - Page 3 IMPORTANT SAFETYGUARDS Please observe the following safety measures, when install and use such product: 1. Please read and keep this manual. 2. The installation and maintenance of such product should be operate under the operation regulations by professional. 3. Please do not install the product on the table or bracket unstably. 4.
-
Page 4: Summary
SUMMARY Such Keyboard is a product supporting with Intelligence Dome Camera, decoder and other terminal receivers. It connects to the receiver by EIA/RS-485 electric interface. Without the bus driver, one keyboard at most to control 32 domes or decoders, and the longest communication distance is 1.2Km. the intelligence dome camera can be controlled and setup expediently by such control keyboard, and it can also control the terminal decoder directly, achieve the control to the Pan/Tilt, lens, light, wiper and other front equipments. -
Page 5: Front Panel
4-channel Looping camera video output: to connect to the assistant monitor Monitor output: to connect to the output end of the monitor Impedance matching switcher: the corresponding impedance matching switcher should be switched to , when there is load of the looping output end The adjust knob of the image brightness The adjust knob of the image color FRONT PANEL... -
Page 6: Keyboard Operation
It means the current address is 001, the baud rate is 2400bps, the protocol code is P003 the corresponding relations of the protocol code with the protocol will be listed in Table 2 ,the video format is PAL, the version code is V1.2 After 10 seconds, it will be displayed to keyboard operation interface, the content of input data buffer ,the control mode ,and the current address will be displayed at the furthest bottom of the screen. - Page 7 press: AUTO press: SHOT Explain: some protocols do not need to setup the line scanning, just run the line scanning directly. After running, if the dome or Pan/Tilt is out of control, probably the protocol adopted doses not support line scanning 8.1.14.
- Page 8 At “SYSTEM SETTING” item, move the joystick to right, display the submenu SYSTEM SETTING “SYSTEM SETTING”. Move the joystick up or down to choose the menu item, and move the joystick right or left to setup the parameter. PROTOCOL At such item, move the joystick right or left to display: P000—P001—P002—P003—P004— P005—P006—P007—P008—P009—P010—P011—P012—P013—P014—P015 16 kinds of protocols.
- Page 9 BAUD RATE At such item, move the joystick right or left to choice the four baud rates: 2400bps—4800bps—9600bps—19200bps PASSWORD At such item, move the joystick right or left to display the submenu as following: PASSWORD SETTING PASSWORD ON/OFF At menu item “CHANGE PASSWORD”, move the joystick right, to switch the ON/OFF of PASSWORD.
- Page 10 BACK LIGHT ON move the joystick at such item right or left to switch the back light ON/OFF. ICR SHOT AUTO move the joystick at such item right or left to switch the ICR SHOT ON/OFF. IRIS AUTO move the joystick at such item right or left to switch the IRIS AUTO/MANUAL. D-ZOOM move the joystick at such item right or left to switch the Digital ZOOM ON/OFF.
- Page 11 press OPEN to enter the submenu of tracking edit. At such submenu, move the joystick right or left to move the active cursor right or left, and move the joystick up or down to add or reduce the content of current menu item.
- Page 12 enter/ exit menu press FUNC & together for short FUNC+ move the menu cursor up press FUNC & together for short FUNC+ move the menu cursor down press FUNC & together for short FUNC+ enter the submenu adjust the content of current menu TAPE the operation of entering password as input 1-------- input number 1, and press CAM...
- Page 13 TIME system date YYYY/MM/DD system time HH/MM/SS. FORMAT [ASIA U.S. EURO]. LIVE TIME DISP: the position of live time displaying [TOP TOP_LEFT TOP_RIGHT NON] BORDER DISP border color [GRAY WHITE BLACK OFF]. BACK COLOR background color [BLUE BLACK]. VFILTER vision filter [ON: gentleness OFF: clear].
- Page 14 SENSOR LEVEL the effective sensor level [HIGH: for high level LOW: for low level]. DETECT TIME the detect time of sensor alarm. MOTION SWITCH motion alarm switcher [ON OFF]. MOTION SET the setup of motion alarm [refer to “the setup of motion alarm”]. DETECT TIME the detect time of motion alarm.
-
Page 15: Troubleshooting
NEXT: next page. Ten recorders one page, amount 10 pages. Press “SEQ” to turn over the page. ERASE: erase all the alarm recorders, and record from 001 newly. RESET DEFAULT press “SEQ” to confirm the YES to resume the setup left factory. And press “SEQ” to confirm the NO to cancel it.
Need help?
Do you have a question about the AU40M and is the answer not in the manual?
Questions and answers