Table of Contents
Advertisement
10
CLEANING AND MAINTENANCE
Attention ! - Before performing any work on the equipment, pull
the power plug.
10.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of
the engine.
Regularly clean the machine housing with a soft cloth, preferably after
each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
10.2 Lubrication
From time to time, apply a drop of oil to the thread of the lock screw (18).
11
TECHNICAL DATA
Model
Voltage / frequency
Power input
No load speed
Saw blade
Max. depth of cut 90°
Max. depth of cut 45°
Mitre angle
12
SOUND EMISSIONS
Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level L
Acoustic power level L
ATTENTION! The sound power level may exceed 85 dB(A), in
this case individual hearing protection shall be worn.
a
(Vibration)
w
Copyright © 2015
FX1-71
FX1-71
230-240V~ 50 Hz
1800 W
5000 min
Ø 210 x Ø 30 x 2.4 mm
70 mm
45 mm
0 – 45°
pA
A
w
P a g e
-1
3.9 m/s²
www.Ford-tools.com
| 9
EN
100 dB(A)
107 dB(A)
K = 1.5 m/s²
Advertisement
Table of Contents
