Summary of Contents for Salta Trampolines TATR0100
- Page 1 ROUND TRAMPOLINE ASSEMBLY INSTRUCTIONS TRAMPOLINE SPECIFICATIONS: 183cm 244cm 366cm TRAMPOLINE SIZE 213cm 305cm 427cm AMOUNT OF SPRINGS 3 legs AMOUNT OF LEGS 4 legs WWW.SALTATRAMPOLINES.COM...
- Page 3 INTRODUCTION Before you begin use of this trampoline, be sure to carefully read all the information Provided to you in this manual. Just like any other type of physical recreational activity, Participants can be injured. To reduce the risk of injury, be sure to follow appropriate safety rules and tips. Misuse and abuse of this trampoline is dangerous and can cause serious injury! Trampoline, being rebounding devices, propel the performer to unaccustomed heights and into a variety of body movements.
- Page 4 INFORMATION ON USE OF THE TRAMPOLINE Initially, you should get accustomed to the feel and bounce of the trampoline. The focus must be on the fundamentals of your body position and you should practice each bounce (the basic bounces) until you can do each skill with ease and control. To brake a bounce, all you need to do is flex your knees sharply before they come in contact with the mat of the trampoline.
- Page 5 ACCIDENT CLASSIFICATION Mounting and Dismounting: Be very careful when getting on and off the trampoline. DO NOT mount the trampoline by grabbing the frame pad, stepping onto the springs, or by jumping onto the mat of the trampoline from any object (i.e. a deck, roof, or ladder). This will increase your chances of getting injured! DO NOT dismount by jumping off the trampoline and landing on the ground regardless of the makeup of the ground.
- Page 6 Weather Conditions: Please be aware of the weather conditions when using the trampoline. If the mat of the trampoline is wet, the jumper could slip and injure him or herself. If it is to windy, jumpers could lose control. Limiting Access: When the trampoline is not in use, always store the access ladder in a secure place so that unsupervised children cannot play on the trampoline.
- Page 7 TRAMPOLINE SAFETY INSTRUCTIONS JUMPERS: Do not use trampoline if you have consumed alcohol or any drugs Remove all hard sharp objects from person before using trampoline You should climb on and off in a controlled and careful manner. Never jump on or off the trampoline and never use the trampoline as a device to bounce onto or into another object.
-
Page 8: Trampoline Placement
TRAMPOLINE PLACEMENT The minimum overhead clearance required is 24 feet (7.3 meters). In terms of horizontal clear- ance, please ensure that no hazardous objects are near the trampoline such as tree limbs, other- recreational objects (i.e. swing sets, swimming pools), electrical power wiring, walls, fences, etc. For safe use of the trampoline, please be aware of the following when selecting a place for your trampoline: Make sure it is placed on a level surface... - Page 9 LESSON PLAN WARNING The following lessons are suggested in order to learn basic steps and bounces before moving onto more difficult, complicated bounces. Before actually getting on and using the trampoline, you should read and understand all safety instructions. A complete discussion and demonstration of body mechanics and trampoline guidelines should occur between the supervisor and student as well.
- Page 10 Lesson 2 Review and practice of techniques learned in Lesson 1 Knee Bounce-Demonstration and practice. Learn the basic down to knee and back up before trying half twist to left and right Seat Bounce -Demonstration and practice. Learn basic seat bounce then add a knee bounce, hands and knees; repeat Lesson 3 Review and practice skills and techniques learned in previous lessons Front Drop-To avoid mat burns and teach the front bounce position, all students...
- Page 11 BASIC TRAMPOLINE BOUNCES THE BASIC BOUNCE 1. Start from standing position, feet shoulder width apart and with bead up and eyes on mat. 2. Swing arms forward and up and around in a circular motion. 3. Bring feet together while in mid-air and point toes downward.
- Page 12 Please select your trampoline size. Reference Part Number Description Number 183cm 213cm 244cm 305cm 366cm 427cm Trampoline Mat, TATR0100 stitched with V-Rings TATR0200 Frame Pad TATR0300 Top Rail with Leg Sockets TATR0400 Top Rail TATR0500 Leg Base TATR0600 Vertical Leg Extension...
- Page 13 STEP 1 – Frame Layout Please select your OWN tubing parts’ quantity according to the products in your hand from following illustrations. All parts with the same par # are interchangeable and have not “right” or “left” orientation, to connect the parts, simply slide a section tubing that is smaller on one end into the adjacent section that has a larger opening.
- Page 14 STEP 2 - Support Assembly A. Slide all Vertical Leg Extensions (6) onto the Leg Base(5) as shown STEP 3-Top Rail Assembly A. Two people will be necessary at this point to assemble the trampoline. One person lifts the Support Assembly from step 2 to a standing (vertical) position and inserts one of the sockets of the Top Rail with Sockets (3) into the Vertical Leg Extension portion of the Support Assembly.
-
Page 15: Trampoline Mat
STEP 4 - Trampoline Mat Assembly When Attaching springs to the trampoline mat, Please be careful. You will need another person to help you with this portion of the assembly. CAREFUL-When attaching the springs, the Connector Points can become pinch points since the trampoline is tightening up. A. - Page 16 C. On the drawing below is showed how to assemble the trampoline mat. Choose a point at the frame and attach the spring to the trampoline mat (1). Then right across this point (six o'clock) you attach the next spring (2). Attach spring 3 and 4 in the same way.
- Page 17 If you notice that you have skipped a hole and V Ring connection, recount and remove or attach any springs required to maintain the count of springs. STEP 5-Safety placard Attachment Using the tie wrap, attach the Safety Instruction Placard (8) to the trampoline. The tie wrap should go around the Vertical Frame joint and the Top Rail to ensure that it doesn’t slide off the trampoline.
- Page 18 STEP 6-Frame Pad Assembly Lay the Frame Pad (2) over the trampoline so that the springs and the steel frame is covered. Please ensure that the Frame Pad covers all metal parts. Tie the strap located at the under side of the frame pad to the frame. Select your Pad model.
-
Page 19: Care And Maintenance
CARE AND MAINTENANCE This trampoline was designed and manufactured with quality materials and craftsmanship. If proper care and maintenance is provided, it will provide all jumpers with years of exercise, fun, and enjoyment as well as reduce the risk of injury. please follow the guidelines listed below: This trampoline is designed to withhold a certain amount of weight and use.
Need help?
Do you have a question about the TATR0100 and is the answer not in the manual?
Questions and answers