6.
In the "Format memory / delete all data" information
window, use the UP or DOWN button to select OK and
press the OK button. The storage medium is formatted.
NOTICE! When the memory card is formatted, all of the
stored data is permanently deleted.
1.
Press the MENU button to exit the menu.
2.
Press and hold the ON/OFF button for approximately
two seconds to switch off the device.
3.
Disconnect the device from the power supply.
*not included in the delivery
10 Connecting the power supply
Power supply via USB cable
1.
Insert the mini USB connector on the USB cable into
the USB connector socket on the camera.
2.
Insert the USB-A connector on the cable into the empty
USB port on the computer. The computer provides the
power supply once it has been switched on. The green
light appears on the camera.
NOTICE! Using a suitable USB network adapter*, the
USB cable can also be used to connect the camera to
mains power or to a power bank.* Simply insert the
USB-A connector into the corresponding connector
socket of the USB network adapter or power bank.
Power supply via in-car charger
1.
Insert the mini USB connector on the in-car charger
into the USB connector socket on the camera.
35 / 48