Power Acoustik PTID-3600 Owner's Manual page 11

Audio Setting
Press SEL button on the Remote Control to select the audio setting (or on front panel, long press
SEL button in radio mode, short press SEL button in other mode to select the audio setting)
BASS =>TREBLE => BALANCE => FADER => EQ.
Press / buttons on remote to select the audio setting item (or press the VOL knob on front panel
to select the setting item).
Press ENTER button or
selected
item.
Press / buttons on remote to adjust the audio setting data (or press the
panel to adjust the setting data).
Press SEL button on remote again to save the setting data and return to current mode.
Notes: If turn off the power, all the settings of each mode will be saved.
- If turn off the battery power, all the settings will be clear and become factory default setting.
- If you don't adjust setting within 3 seconds after selecting the desired setting item, the unit will
automatically return to the current mode.
Menu Settings
Press MENU button on front panel or remote control to enter MENU setting.
During FM mode press the MENU button to enter the setting mode.
Press / buttons on the remote control or press the knob on front panel to select the setting.
Press ENTER button or
Press / buttons on remote control or press the
setting.
Press ENTER button or
MENU to return to last settings list.
• In Radio mode short and repeat press the OK button to select these settings:
AUDIO=> EXPERT => CLOCK
In USB/ Memory Card mode short and repeatedly press the OK button to select these settings:
AUDIO => PICTURE => EXPERT => CLOCK
AUDIO MENU
MENU DESCRIPTION(tuning by left or right arrow)
BASS Support 10 levels. Default level is 0.
TREBLE Support 10 levels. Default level is 0.
BALANCE Support 10 levels for each left and right channel. Default is left equal to right.
FADER Support 10 levels for each front and rear channel. Default is front equal to rear.
EQ DSP OFF FLAT→CLASSICS→POP→ROCK→DSP OFF
button on remote control or OK button on front panel to enter the
button on remote control or OK button on front panel to enter the setting.
button on remote control or OK button on front panel to confirm, press
Page - 10
knob on front panel to adjust the
knob on front