TABLE OF CONTENTS Introduction Contents System Requirements Hardware Operating System Setup Installing the Batteries Optical Mouse Wireless Keypad Connecting the Receiver Identification Code Setting the Identification Code Optical Mouse Wireless Keypad Button Function Setup Instruction MULTI MEDIA BUTTON Instruction Key Functionality Calculator/Keypad Send Result Number Lock Specification...
INTRODUCTION Contents In addition to this user’s guide, this package contains: • Wireless Keypad • Wireless Mini Optical Mouse • USB Receiver • USB extension cable • 3xAAA batteries (2 for mouse, 1 for keypad) Introduction Congratulations on your purchase of the wireless keypad & calculator & mini optical mouse.
SETUP Install drivers before plugging in the device Installing the Batteries Optical Mouse • Remove the battery cover from the top of the mouse by using release mechanism on the underside of the mouse. • Insert the supplied batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery housing.
SETUP Wireless Keypad • Remove the battery cover located on the bottom of the keypad. • Insert the supplied batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery housing. •...
IDENTIFICATION CODE Setting the Identification Code After your computer detects the USB receiver and the driver software is installed, you must set the ID code between the receiver and the mouse as well as between the receiver and the keypad BEFORE you can use them. To do this, do the following: NOTE: Make sure that your computer is turned on and has detected the USB receiver before you set the ID code.
Battery life 20 hours at Active mode with Alkaline Battery Resolution 800 DPI Net Weight 41.5grams Operating Distance 1.5m Operating humidity 40%~90% Dimension 86.7x45.4x30mm Description SD-E01502-BBK-1 Wireless Numeric Calculator Keypad 7-22868-55062-5 With Mini Optical Mouse PR10670_KeyPad_Mouse_en.indd 10 15/8/05 3:14:31 pm...
Page 10
FCC ID: SLQ-E01903-ABK-1 FCC Compliance and Advisory Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules.
FCC/CE STATEMENT Europe-European Union Notice Radio products with the CE alert marking comply with the R&TTE Directive (1995/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards). •...
Lifetime Product Warranty warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Sondata will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Sondata dealer from whom you purchased the product.
Need help?
Do you have a question about the SD-E01502-BBK-1 and is the answer not in the manual?
Questions and answers