Summary of Contents for Plustek NVR
- Page 1 NVR&HVR Easy guide v1.0 & & Easy guide Thanks for choosing our products, please read this manual carefully before use!
- Page 2 NVR&HVR Easy guide v1.0 1. NVR connect to IPCAM 1）Search IPCAM Click CAMERA icon, popup CHANNEL CONFIG sub menu. Analog cam FAB IDCAM Onvif IPCAM FAB IPCAM...
- Page 3 NVR&HVR Easy guide v1.0 Click SEARCH button, after 20 seconds，all IPCAM ID number or IP address in local network will be displayed in menu, and auto assign to deferent channel，click SAVE, exit menu, All IPCAM image will display. 2）Manual add in IPCAM Click MENU button.
- Page 4 SUB STREAM---This function only for FAB protocol IPCAM, if set CIF, split image resolution only 320*240, but image very fluid. Internet also become fluid。 2. NVR connect to cloud Nvr connect to cloud, then mobile APP and client software can connect to NVR over internet. Click NETWORK icon.
- Page 5 NVR&HVR Easy guide v1.0 Enable DDNS and CLOUD, Click DHCP button, NVR will get IP address from router, click SAVE. Click INFO icon, popup INFORMATION submenu.
- Page 6 Easy guide v1.0 In DDNS line, domain name and machine number display, if you see @ symbol, mean NVR already connect to cloud server。 3. Mobile APP connect to NVR If you are using this software for the first time, please download the software of “HVR cloud”, setup the software, then open.
- Page 7 NVR&HVR Easy guide v1.0 Click SEARCH button, search all NVR in local network.
- Page 8 NVR&HVR Easy guide v1.0 Select NVR number what you want to view, return login interface, select CLOUD, click LOGIN, APP will connect NVR. 4. CMS connect to NVR Copy CMS software to PC from disk, this CMS software is green software, no need setup, double click start.exe in folder to run the software.
- Page 9 NVR&HVR Easy guide v1.0 After run the software, device list window will display all NVR in local network, right click NVR/CMS, click “turn off NVR auto search”, will stop auto search NVR function; Select NVR device, right click, click “Connect”, if NVR...
- Page 10 Select NVR, right click, click “property”, enable “cloud mode”, show name can be modified into easy remember name. 2) Manual add in Right click NVR/CMS ， select “ new IP ” ， input login machine information，enable cloud mode，click OK to exit menu，right click new device, select “connect”...
-
Page 11: Fcc Statement
NVR&HVR Easy guide v1.0 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.