KitchenAid KDFE104DSS User Manual page 5

Dries dishes with heat and a fan. This
option, with the use of rinse aid, will provide
the best drying performance. Plastic items
(on some
are less likely to deform when loaded in the
models)
top rack. Turn the ProDry™ option off for an
air dry.
Dries dishes with heat. This option, with the
use of rinse aid, will provide the best drying
performance. Plastic items are less likely to
deform when loaded in the top rack. Turn
the Heat Dry option off for an air dry.
Lower jets clean pans, casseroles, etc.,
with tough food soil to eliminate the need
for soaking and scrubbing of dirty, baked-on
(on some
dishes. The upper rack has two spray zones
models)
in the front corners to reach into deeper or
oddly shaped items.
Raises the main wash temperature to
improve cleaning for loads containing
tough, baked-on food.
Sanitizes dishes and glassware in
accordance with NSF International NSF/
ANSI Standard 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for licensed
food establishments. Only sanitizing
cycles have been designed to meet
the requirements of the NSF/ANSI 184
performance standard for soil removal
and for sanitization efficacy. There is no
intention, either directly or indirectly, that
all cycles on a NSF/ANSI 184 certified
dishwasher meet the NSF/ANSI 184
performance standard for soil removal
and for sanitization efficacy.
The Sani Rinse indicator glows at the end
of the cycle if the Sani Rinse option was
successfully completed. If the indicator
does not activate, it is probably due to
the cycle being interrupted.
For added convenience, use for washing a
small load of dishes in the top rack to help
keep the kitchen continuously clean.
Runs the dishwasher at a later time or
during off-peak electrical hours. Select a
wash cycle and options. Press the Delay
button. Press START/RESUME. Close the
or
door firmly.
NOTE: Anytime the door is opened (such
as, to add a dish), the Start/Resume button
must be pressed again to resume the delay
countdown.
OPTIONS CAN BE WHAT IT DOES
SELECTED
WITH
Available Uses the heating
with any element, vents, and
cycle except a fan to speed drying
Rinse Only times. ProDry™ option
defaults to ON when
any cycle is selected
except for Rinse Only.
Available Activates the heating
with any element at the end of
cycle except a wash cycle to speed
Rinse Only drying times. Heat Dry
defaults to ON when
any cycle is selected
except for Rinse Only.
Tough Activates the
ProScrub spray jets
®
Normal
to provide intensified
ProWash™
cleaning power to
Top Rack
specific wash areas.
Only
Tough
Raises the main wash
temperate from 105°F
Normal
(41°C) to either 130°F
ProWash™
(55C°) or 140°F (60C°).
Tough Increases the main
wash temperature from
Normal
105°F (41°C) to 140°F
ProWash™
(60°C) and the final
rinse from 140°F (60°C)
to 155°F (68°C).
Available
Slightly faster wash
with any
for smaller loads.
cycle
Available Delays the start
with any of a cycle to the
cycle specified time.
5
ADDED TIME ADDED WATER
TO CYCLE GALLONS
(LITERS)
TYPICAL MAX
44 51
52 52
53 73
(0 – 11.2)
42 60
(0 – 11.2)
53 73
(0 – 11.2)
-7 -30
240 480
0
0
0 – 3.0
0 – 3.0
0 – 3.0
0
0