Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ISOL-8 PowerStation
Summary of Contents for ISOL-8 PowerStation
- Page 1 I S O L Isolate, I SO-lat, v.t. to render free from external influence PowerStation User Manual...
- Page 2 In turn, it will reward you with a lifetime of outstanding performance. Should any part of this manual or the operation of the PowerStation not be clear to you, please do not hesitate to contact your ISOL-8 dealer.
- Page 3 A flat, smooth surface is required. A dedicated high performance equipment platform sited away from other appliances is the optimum location. Make sure the support for the PowerStation is capable of carrying the 19Kg weight. WARNING! Do not place the PowerStation near liquids, or place liquid- filled containers near the unit.
- Page 4 Avoid adapters and extension cables and keep overall cable lengths as short as is practical for best results. The PowerStation is designed for supplying source components only, do not connect high current loads such as power amplifiers, receivers, video projectors, subwoofers, media servers or any other product that may require heavy continuous or transient power.
- Page 5 DC. An independent, high purity mains waveform is generated from this energy reservoir. The incoming mains frequency is fixed, but the PowerStation output is free from this restriction, allowing the user to take advantage of a higher “refresh rate” for connected equipment’s power supplies, thus enhancing performance.
-
Page 6: Front Panel View
Front Panel View Channel 1 frequency indicators Frequency select buttons “DSP” Display control button Digital display Function Indicators “PWR” Power control button “SET” Set control button Channel 2 frequency indicators 67.5 67.5 100Hz 100Hz 81Hz 67.5Hz 60Hz 50Hz... - Page 7 The five vertical LEDs on each side of the PowerStation indicate the output frequency of channel 1 and channel 2 respectively.
- Page 8 Once in frequency “SET” mode, even if no changes are made, press and hold “SET” to get back to normal display mode. The PowerStation will always revert to the settings which have last been saved to memory when turned on.
- Page 9 Note that if a 50Hz synchronous motor turntable is connected to a PowerStation outlet, selecting 67.5 Hz will increase the turntable speed to 45rpm. Similarly if a 60Hz synchronous motor turntable is connected to a PowerStation outlet, selecting 81 Hz will increase the turntable speed to 45rpm.
- Page 10 Check that the connected equipment functioning correctly and are appropriate for the PowerStation’s output capacity. Fuses can also age and occasionally fail unexpectedly. Turn off the PowerStation using the rear panel switch, disconnect from the supply and replace the appropriate fuse with one of an identical type.
- Page 11 If this is not possible please contact us to obtain a Return Authorisation Number. Returns without this number will not be accepted. If it is not returned to us in its original packaging, ISOL-8 reserve the right to make a nominal charge for packaging by return.
- Page 12 Isol-8 Teknologies Ltd PO Box 56402 London SE3 7WQ fax: +44 (0) 20 8856 0616 email: info@isol-8.co.uk Please visit our web site: www.isol-8.co.uk © Isol-8 Teknologies 2010...
Need help?
Do you have a question about the PowerStation and is the answer not in the manual?
Questions and answers