Related Manuals for Allmand PAL 1000Q2
Summary of Contents for Allmand PAL 1000Q2
- Page 1 OPERATOR’S AND PARTS MANUAL PAL 1000Q2, PAL 1250W2, and PAL 2500W4 PORTABLE LIGHTING PRODUCTS PAL 1000Q2 PAL 2500W4 PAL 1250W2...
- Page 2 PORT-A-LITE OPERATOR’S AND PARTS MANUAL PAL 1250W2 AND PAL 2500W4 ALLMAND BROS. INC P.O. BOX 888 HOLDREGE, NE 68949 PHONE: 308/995-4495, 800/562-1373 ALLMAND FAX: 308/995-5887 ALLMAND PARTS FAX: 308/995-4883 PORT-A-LITE PRODUCTS...
-
Page 3: Available Models
PRODUCT DESCRIPTION AND FEATURES The Allmand PORT-A-LITE line of affordable HID lighting provides in- creased jobsite safety and productivity in a wide range of applications. Allmand PORT-A-LITE products are built tough for years of trouble-free use. The exclusive “parallel” lamp fixtures hold the bulb in the optimum hori- zontal position. - Page 4 OPERATIONAL AND SAFETY DECALS LIGHT IDENTIFICATION DECAL DANGER HIGH VOLTAGE PART NO. DD-333 PART NO. DD-332 ON-OFF DECAL GROUND LUG LOCATION PART NO. DD-335 PART NO. DD-133...
-
Page 5: Operation Procedures
OPERATION AND SAFETY INSTRUCTIONS OPERATION PROCEDURES: To remove fixture from storage on base and attach fixture to mast prior to use: 1) Remove safety pin retaining fixture to base and remove fixture from storage position. 2) Set fixture on top of mast aligning holes in mast and fixture mounting tube. 3) Re-install safety pin to attach fixture to mast. - Page 6 ASSEMBLY PARTS AND ACCESSORIES SHO 1000 METALLIC VAPOR LAMP ASSEMBLY (Used on PAL 1000W2 and PAL 2000W4)
- Page 7 ASSEMBLY PARTS AND ACCESSORIES SHO 1000 METALLIC VAPOR LAMP ASSEMBLY PARTS (Used on PAL 1000W2 and PAL 2000W4) PART NO DESCRIPTION 610250 LAMP HOLDER ASS’Y WITH YOKE AND LAMP (SOLID MT.) 610251 LAMP HOLDER ASS’Y WITH YOKE AND NO LAMP (SOLID MT.) 610252 LAMP HOLDER ASSEMBLY WITH NO YOKE OR LAMP 610255...
- Page 8 ASSEMBLY PARTS AND ACCESSORIES PAL 1000Q2 ASSEMBLY REQ’D PART NO DESCRIPTION 530452 PAL 1000Q2 BASE 530448 6” WHEEL 046214 1/2-13 X 2-3/4 HEX BOLT 044031 5/16-18 KEPS NUT 713578 RUBBER BUMPER 510007 CORD GRIP 530462 OUTLET BOX 630132A RECEPTACLE 15A GFCI...
- Page 9 ASSEMBLY PARTS AND ACCESSORIES PAL 1250W2 ASSEMBLY REQ’D PART NO DESCRIPTION 530400 1250 BASE 310391 CAPACITOR 28UF 480 VOLT 026026 CUSHION CLAMP FOR CAPACITOR 310116 TRANSFORMER 047005 1/4 FLAT WASHER 046010 1/4-20 X 3/4 BOLT 530404 BASE BOTTOM COVER 045216 TINNERMAN NUT 530123 20A TOGGLE SWITCH...
- Page 10 ASSEMBLY PARTS AND ACCESSORIES PAL 2500W4 BASE ASSEMBLY REQ’D PART NO DESCRIPTION 530501 BASE ASSEMBLY 530506 PLATFORM 530336 CASTER W/BRAKES 530128 WHEEL 10” X 1 3/4” 046244 BOLT 5/8-11 X 3 GRADE 5 530508 BASE BOTTOM COVER 530124 BOOT SWITCH COVER 530123 SWITCH 20A TOGGLE 310116...
- Page 11 ASSEMBLY PARTS AND ACCESSORIES PAL 2500W4 TOWER ASSEMBLY REQ’D PART NO DESCRIPTION 530514 MAST OUTSIDE 530509 MAST INSIDE 530337 BRAKE WINCH 047010 WASHER FLAT 5/16” 044033 5/16-18 NYLOCK NUT 044048 1/2-13 NYLOCK NUT 320112 PULLEY 2.5” WITH BUSHING 046200 1/2-13 X 2-1/4 HEX BOLT 530430 LIGHT BAR 530463...
-
Page 12: Electrical Schematics
ELECTRICAL SCHEMATICS PORT-A-LITE PRODUCTS PAL 1000W and 2000W 60 Hz PAL 1000W and 2000W 50 Hz PAL 1500W 60 Hz... -
Page 13: Limited Warranty
Additionally, Allmand Bros. Inc., hereby warrants all replacement parts supplied by Allmand Bros. Inc. to be free from defects in material and workmanship for a period of 90 days after date of invoice. Delivery shall be deemed for the purposes of this warranty to have occurred no later than five days following the date of sale agreement or invoice unless the purchase agreement or invoice specifically states a later delivery date in which case such delivery date shall control.
Need help?
Do you have a question about the PAL 1000Q2 and is the answer not in the manual?
Questions and answers