Download Print this page

LogiCO2 Scout User Manual

Portable bluetooth co2-sensor for smartphone

Advertisement

Quick Links

User Manual
LogiCO2®-Scout
ENGLISH
LogiCO2®-Scout: Portable Bluetooth CO2-sensor for
smartphone (below mentioned the "Scout").
!
WARNING!
Please read these instructions carefully prior
to start-up and use. These instructions should
be saved for future reference and passed on to
any subsequent owner. Failure to follow any of
these instructions could result in bodily harm
or death, and could void product warranties.
LogiCO2 International AB, its affiliates and third
party providers assume no responsibility for claims
arising from improper or careless use or handling
of its products. Retain this instruction.
CO2 Concentration Levels (%) and Effects
(%)
Effect
20.0
Death within a few seconds.
10.0
Convulsion, Unconsciousness, Death.
7.0
Dizziness, Vomiting, Headache, Reduced blood supply to brain.
4.0
IDLH -Immediate Danger to Life and Health.
3.0
Normal exhale concentration; increased
breath and pulse rates.
1.0
Shortness of breath possible.
0.5
Maximum for working conditions (TWA 8 hr.PEL).
0.1-0.2
Recommended max value in public areas.
0.04
Fresh air.
Important Safety Information!
The Scout is an instrument that measures the CO2
concentration in the ambient air. Through Bluetooth
the Scout sends the measurements to a smartphone
with the Scout App, enabling a person to know if it
is safe or not to enter a place that may contain high
levels of CO2 ("Danger Zone"). The reading of the
concentration is done safely OUTSIDE the Danger
Zone. Since a CO2 reading normally takes at least 30
seconds to complete, and the human body reacts in
about 2 seconds, it is dangerous to rely on a Scout
mounted on your belt, or otherwise carried on a
person. Before conducting the actual Danger Zone
testing, always conduct a CO2 reading in fresh outdoor
air to ensure that the Scout is calibrated (see Fresh Air
Testing below).
When testing a Danger Zone, the Scout should be
placed into the LogiCO2® foam ball provided with the
Scout (below mentioned the "Foam Ball") and rolled
into the Danger Zone, where the measurement is
made in accordance with these instructions. The value
is displayed on the phone outside the Danger Zone
using the LogiCO2-app.
The Scout does not have a digital display and does not
display the C02 levels. If the alarm sounds, it should be
treated as a potentially serious condition.
App available for free at:

Advertisement

loading

Summary of Contents for LogiCO2 Scout

  • Page 1 Through Bluetooth the Scout sends the measurements to a smartphone with the Scout App, enabling a person to know if it is safe or not to enter a place that may contain high levels of CO2 (“Danger Zone”). The reading of the concentration is done safely OUTSIDE the Danger Zone.
  • Page 2 It also has a battery indicator and a the LED turns green. graphical log. When starting the Scout; if the LED on the Scout lights The App displays the actual CO2 concentration. green followed by a short red blink and then goes dark, Depending on the measured levels, the App will display the battery needs to be charged.
  • Page 3 Pic.1: Tap on “Scan devices”. Pic.2: Tap on “LOGICO2-x” to connect. If more than one Scout is within the smartphones range, they will all be visible in the “Scanning for devices”-list. To be sure that you connect to your own Scout, tap on “Check”. If it is “your Scout”, the LED on it will flash blue twice.
  • Page 4 0.03% and 0.05% proceed with CO2 Danger Zone testing (See section How to Conduct a CO2 Danger Zone Testing below). 5. If the Scout shows a CO2 value below 0,03% or higher than 0,05%, you must calibrate the Scout. (See Calibration section below)
  • Page 5 4. Ensure that the App shows reading. 5. Gently role the Foam Ball into the Danger Zone. Testing 1. Turn on the Scout and connect to a smartphone. WARNING! Be sure to roll the Foam Ball Double check that the LED light is blue.
  • Page 6 Concentration TWA (Time Weighted Average) Monitoring When the CO2 concentration is over 3%, the Scout and the smartphone will start emitting warning sounds It is unhealthy for humans to be exposed to more (“Red High Alarm”). The Scout and the smartphone...
  • Page 7: Technical Specifications

    Technical Specifications Product features Operating Principle: Non-dispersive infrared (NDIR) LogiCO2-Scout Measurement range: 0-6% volume CO2 Battery information Powered: Li-Ion 3,6V, 1150mAh Operating time: Approx. 12h Charging: With a USB - Micro USB cable to a normal smartphone charger Charging time: Approx.
  • Page 8 Manufactured by: LogiCO2 International AB Box 4113 E-mail: info@logico2.com SE-426 04 Västra Frölunda, Sweden Web: www.logico2.com © 2017-09-19 R1.4 LogiCO2 HFE1100 EN...