Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Zadro Health Soultions THE01
- Page 1 Infrared MultiScan Thermometer...
- Page 2 Readings turns o before changing batteries. Durable +/- 0.4˚F (+/-0.2˚C). viewing Easy to Clean Versatile...
- Page 3 1. The Multiscan Thermometer is a very delicate electronic device. ONLY THE SENSOR TIP IS WATER RESISTANT, THE DEVICE ITSELF IS NOT WATER RESISTANT. Protect it against exposure to water and other types of liquids 2. Do not expose the thermometer to direct sunlight. 3.
- Page 4 WATER RESISTANT...
- Page 5 battery will continue to Dispose of the old batteries properly, and according to your local regulations. Warning: • Use only fresh batteries of the required type and size. • The batteries may explode if mistreated. Do not attempt to recharge or disassemble the batteries.
- Page 6 The Multiscan Thermometer is a delicate electric device designed for reading either body temperature within the inner ear or for reading the temperature of liquids, foods, or other surfaces. Body Temperatures: When reading the inner ear body temperature, accurate and reliable readings are obtained by the infrared sensor.
- Page 8 Measuring Temperatures 1. Press POWER(Scan) button and thermometer will turn on and immediately perform automatic calibration. (see Fig. 1-1) 2. Selecting Memory Storage Zone (M1 or M2) for temperature measurement • Immediately after the automatic calibration function is As soon as the M1 or M2 is chosen, the last measured completed, the M1 (Memory 1) or M2 (Memory 2) symbols temperature reading will appear on the display.
- Page 9 4. When reading is less than 100°F (38°C), a happy face will appear on the screen. When the reading is above 100°F (38°C), the display will show a sad face, as well as consecutive audio signals. (see fig. 4-1 and 4-2.) Measuring Surface Temperatures Temperature readings may also be taken to determine the temperature of an item (ie.
- Page 10 7. Temperature scale of the infrared thermometer can be switched between Celsius (see fig. 7-1) and Fahrenheit (see fig. 7-2). To do so, simply turn the thermometer ON. 1.) Press and hold the SCAN button. 2.) While holding the SCAN button press and hold the MEM button.
- Page 11 When (see g. 9). (see g. 10).
- Page 13 non-medical...
- Page 14 Cleaning and Maintenance Cleaning and Maintenance water resistant and should be cleaned...
- Page 15 1. Permanently indicating low temperatures - If the scan button is pressed before the sensor is placed correctly in the ear then the readings taken will be too low. - The sensor is dirty. Clean the sensor with a soft, damp cloth or with cotton swabs dipped in diluted alcohol.
- Page 16 www.zadrohs.com Zadrohs@zadrohs.com Rev04202010...
Need help?
Do you have a question about the THE01 and is the answer not in the manual?
Questions and answers