Operation - tuact Venom-X4 User Manual

Setup
To configure the personal settings, there are two ways to setup the Venom-X4 -- PC Setup software (Windows)
and Android Setup App.
The PC Setup software is used for off line setup with all the options available.
The Android App is more convenient that it doesn't need to disconnect the Transceiver from console.
Venom-X4 stores 6 configuration and layout profiles in hardware adjustable with the Setup software and the
App.
The Setup software can upgrade the Mouse and Transceiver firmware.
The Venom-X4 Setup software can be downloaded from Tuact website at:
www.tuact.com/software/VenomX4-Setup-Installer.exe
The Venom-X4 Android App can be downloaded from our website at:
www.tuact.com/software/VenomX4-App-Installer.apk Or scan the QR code:
To setup Venom-X4, plug the Venom-X4 Transceiver onto your PC USB port WITHOUT any controller attached,
the Windows would install the driver automatically the first time. Then run the Venom-X4-setup.exe to start your
Venom-X4 configuration.
For more detailed instructions about Setup software and Android App, please refer to the Software and App
Instructions, you can download them from our website at:
www.tuact.com/manual/VenomX4-Setup-Instruction.pdf
www.tuact.com/manual/VenomX4-App-Instruction.pdf

Operation

To adjust the mouse tracking resolution, press the CPI button. The LED will light up with the color corresponding
to 1 of the 3 CPI value preset by the Setup Software.
Many of the Venom-X4 settings and functions can be adjusted and turned on/off during game play by the hot
keys.
The charts below list all the functional key combinations for On the Fly adjustment.
Terms used in the chart:
• F button: Each of the Venom-X4 mouse and wand has a F (function) key,
referred as the F(L) on wand, and F(R) on mouse.
• "+": The symbol of "+" means press two keys at the same time momentarily
• ADS: Aim Down Sight
The arrow keys on keyboard
• "↑↓→←":