Subscribe to Our Youtube Channel
Summary of Contents for Itek AK8639
-
Page 1: Instruction Manual
MOTORIZED CAMERA Home Network Wi-Fi Camera INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE... -
Page 2: Getting Started
Getting Started Remove the Camera and it’s accessories from the box. Remove any packaging from the product. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list. Package Contents ... -
Page 3: Description Of Parts
1. Connect the USB power cord to the USB input port of the camera and insert the other end into a suitable USB power source. 2. It will take about 1 minute for the camera to start up. Compatibility This MOTORIZED CAMERA Home Network Wi-Fi Camera is compatible with the App – “itek Camera”... -
Page 4: First Time Installation
“restore factory settings”. 3. Wait for about 30 seconds until you hear voice message “camera starts, please configure network”. 4. Turn on the “itek Camera” app, press ‘Add a device’, and ‘Quick Wi-Fi configuration’, follow the on-screen instructions to complete the setup. - Page 6 5. Select the same Wi-Fi local/home network, and key-in your Wi-Fi password. 6. Hold your phone near the Wi-Fi Camera, and click ‘Next’. 7. Press ‘Send’ to configure the settings on the Wi-Fi Camera, until you hear a voice...
- Page 7 confirmation. 8. Press ‘Online’ to key-in the Login Password that can be found at the back of Wi-Fi...
- Page 8 Camera (i.e. Access code). 9. It will then show full screen viewing. And you can press the function icon at the bottom of the screen, including ‘Speak’, ‘Listen’, ‘Snapshot’, ‘Video’ & ‘Flip’ for desire purpose, Speak: Tap on the “Speak” option on your screen, in order to speak through your phone,...
- Page 9 Preset: This function is not supported on this model, at this time. 10. On ‘Setting’ page, you can check/edit some functional settings. REMARK: a. When you open the “itek Camera” App next time, you can click to refresh the connected Wi-Fi Camera (from Offline) to ‘Online’ condition, and click to have full screen viewing.
- Page 10 Add New Camera on your existing App Open the “itek Camera” App & Tap on “+ Add a Device” Repeat the same steps as outlines in the “First Time Installation” section above...
-
Page 11: Specifications
After the Wi-Fi Camera has been configured successfully for the first time, other users can download and install the App – “itek Camera” on their iOS or Android devices, and then easily add the same Wi-Fi Camera for operation under the App with either ‘Scan the code’ or ‘Add manually’... -
Page 12: Care And Maintenance
Care and maintenance Read the following recommendations before using the product. Don’t use abrasive cleaning solvents to clean the camera. Do not expose the camera to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. ... - Page 13 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the AK8639 and is the answer not in the manual?
Questions and answers