Please refer to your specific vehicle manufacturer guidelines for the installation of electrical components and wiring. Details on operating the Zonar Connect and its built-in applications and software are given in this Zonar Connect User’s Guide. A professional team of Zonar support technicians and engineers are available to answer your installation questions.
Zonar Connect ® Installation/User Guide System Overview Real-Time Delivery of Engine Condition and Performance Data, Driver Performance and Location Zonar Secure Services: Encrypted Data Transmissions to Customer On-Site Location...
Zonar’s Zonar Connect Tablet All-in-One Device Zonar’s Zonar Connect Tablet is the most versatile mobile device in the transportation industry. Applicable to fleets of all vehicle types, this innovative platform works both inside and outside the vehicle to provide fleet managers valuable operational information. The Zonar Connect helps automate common processes offering the flexibility to create custom applications and integrating to maximize operational value.
Installation/User Guide Important Notice It is the Owner’s sole responsibility to install and use the Zonar products in a manner that will not cause accidents, personal injury or property damage. For the purposes of this notice, “Owner”, “you” and “your” means the party (including any person authorized by that party to use and/or install the Product) that has either: (a) purchased the Product;...
400 - 600 mA Worst case 1.0 A Operating Temperature -4˚F to 140˚F (-20˚C to 60˚C) Docked: The Zonar Connect is configured to only charge the internal battery when the vehicle’s engine is on and Operating Temperature 14˚F to 140˚F (-10˚C to 60˚C) Un-Docked: up to 30 minutes after the engine has been turned off.
Connect 4 Pin power connector into V3 Start engine Ensure V3 has 3 solid Green LED’s Snap the Zonar Connect into the dock (if it is not already there) Log into the Zonar Connect with ID number and PIN Perform the Zonar Connect system check...
Reference Material 1) Zonar’s support website: http://docs.zonarsystems.net. Note: A user name and password are required to access this site. 2) Please see “Zonar Troubleshooting Reference Guide” for any V3 or Zonar Connect issues you may encounter. Prerequisites 1) The V3™ GPS unit must be fully installed, configured, checked-out and fully operational prior to installing the Zonar Connect.
Zonar Connect ® Installation/User Guide Base Equipment A. Zonar’s Zonar Connect Tablet B. The Zonar Connect Dock C. RAM Mount with Mounting Screws and Aluminum Backing Plate D. V3™ E. Zonar Connect Power/Serial Cable F. AC/DC Power Adaptor (output 5V/2.5A) with a micro-USB cable (optional)
Page 12
The Zonar Connect screen will automatically switch between computer and video display mode without user interaction. While hooking a video feed from a backup camera into the Zonar Connect may can provide a safety benefit, video feeds have the potential to be very distracting. Zonar strongly recommends that customers implement a thorough safety review before deciding to hook up any video feeds into the Zonar Connect.
General Guidelines Drill Holes 1) Do not drill into the Zonar Connect or the Zonar Connect dock unit. This will void the warranty. 2) Capture all drill chips during drilling operations. Do not allow chips to fall onto equipment, furnishings, etc.
1) Do not mount the Zonar Connect in an area that may interfere with the deployment of an air bag. 2) Do not install the Zonar Connect in a location that may impact the driver /co-driver in the event of an accident or sudden stop.
2) The Zonar Connect must be fully docked in order to send data to Zonar servers. 3) Sleep Modes: A. The Zonar Connect enters sleep mode after 2 minutes of inactivity. This timeout can be adjusted to 30 seconds, 1 minute, 10 minutes or 30 minutes.
B. GPS - Solid - Green or Orange C. Status -Solid - Green 3) Power on the Zonar Connect and allow the device to boot up to the login screen: A. ID: Scan driver card or manually enter driver ID B.
V3™ Product Line - 5 Years • Zonar Connect® - 1 Year • EVIR® - 3 Years • All Other Hardware - 1 Year The above warranty periods run from the date of shipment. Provided that the Hardware is used and handled as intended, Zonar will replace any failed or functionally impaired Hardware with equivalent Hardware in terms performance and functionality.
Zonar Connect ® Installation/User Guide Warranty & Notices - FCC Compliance - Cont. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.