Table of Contents
Advertisement
CORPORATE OFFICES:
ADVANTAGE PRESSUREPRO, LLC
205 W. WALL STREET; HARRIS0NVILLE, MO 64701
TEL: 816-887-3505 FAX: 816-887-3705
www.pressurepro.us
FOR ORDERING OR TECHNICAL ASSISTANCE, CONTACT YOUR DEALER.
WARRANTY AUTHORIZATION:
FOR RETURN AUTHORIZATION ON WARRANTY ISSUES
CALL PRESSUREPRO TOLL FREE AT: 800-959-3505
To activate your Warranty, visit www.pressurepro.us and click on the
"Register Your Product" box (located on the homepage under Quick Links).
Customers must retain their original purchase receipt as a copy will be
required for warranty or service work on your PressurePro product.
Developed and Manufactured in the USA
04.21.15
16
Advertisement
Table of Contents
Summary of Contents for PressurePro APS2
- Page 1 FOR RETURN AUTHORIZATION ON WARRANTY ISSUES CALL PRESSUREPRO TOLL FREE AT: 800-959-3505 To activate your Warranty, visit www.pressurepro.us and click on the “Register Your Product” box (located on the homepage under Quick Links). Customers must retain their original purchase receipt as a copy will be required for warranty or service work on your PressurePro product.
- Page 2 Because of the quirks of RF Transmissions and interference, no Conformity documentation is held on file at PressurePro’s Headquarters. Copies can be guarantee of signal reception can be made. PressurePro is not meant to function as a obtained by authorized parties by calling +1-816-887-3505, or by submitting an inquiry pressure gauge or low pressure indicator.
-
Page 3: Limited Warranty
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. To the extent permitted by state ALERT POWER law, APP’s liability for PressurePro will not exceed the purchase price paid for the product. Quick access Power Screen Exits all Menus... -
Page 4: Pre-Installation Instructions
IMPORTANT: Remove Sensors every 4 weeks to ensure that the depends on the environment and conditions present at the time of use. PressurePro is a aluminum stem and brass threads don’t bond. If storing the vehicle for extended device meant for displaying tire pressures and has been designed to be as reliable as periods, remove the Sensors from the aluminum stems. -
Page 5: Initial System Setup And Configuration
Sensors onto their original wheel locations. Pressure readings will show on Display (can GIVE IT POWER! take up to 1 minute for new readings to report). PressurePro system is now active. Find your PressurePro power cord. CAUTIONS: (1) Know the general condition of tires before moving the vehicle. Running on ... -
Page 6: Programming Sensors
PROGRAMMING SENSORS DATA LOGGING IMPORT DO NOT PUT SENSORS ON TIRES. (You’d be amazed at the number of calls Access the “Computer” menu and open the SD card folder. received to prompt this note.) Simply follow the simple steps below and you’ll be Open “pressure_pro_logs”... - Page 7 Display. Your PULSE Display allows transfer of the complete data log by way of a microSD. Data logs will export in .xml format, and works with many programs. PressurePro suggests using Press SEL to install a Sensor to noted Excel.
-
Page 8: Frequently Asked Questions
TEMPERATURE → desired unit of measurement using a sealant or powder, PressurePro recommends the use of a filtered valve stem (or filtered core) to reduce the chance of the Sensor becoming clogged. WHAT HAPPENS DURING A BLOWOUT? During a blowout (or situation with complete loss of pressure) the Display will signal at a 25% loss in pressure and read “00”.
Need help?
Do you have a question about the APS2 and is the answer not in the manual?
Questions and answers