Table of Contents
Advertisement
Quick Links
INSTRUCTION MANUAL & PARTS LIST
TEREX
TEREX
TEREX
TEREX
the signature of quality
MINI- TROWEL / EDGER
POWERFUL
IMPORTANT: WHEN ORDERING PARTS BE SURE TO GIVE MODEL AND SERIAL NUMBER
TEREX
TEREX
TEREX
TEREX
31 SUN PAC BLVD.
BRAMPTON
501 HUEY RD. • • • • ROCK HILL • • • • SOUTH CAROLINA • • • • 29730 • • • • USA • • • • (803) 324-3011 • • • • FAX (800) 633-5534
Bartell
Bartell
Bartell
Bartell
MODEL
B424
EFFICIENT
Bartell
Bartell
Bartell
Bartell
ONTARIO
CANADA
Ltd.
Ltd.
Ltd.
Ltd.
DEPENDABLE
Ltd.
L6S 5P6
(905) 458-5455
JULY 2001
FAX (905) 458-5484
Advertisement
Table of Contents
Summary of Contents for Terex B424
- Page 1 Bartell Bartell Bartell Bartell Ltd. Ltd. Ltd. Ltd. the signature of quality MINI- TROWEL / EDGER MODEL B424 POWERFUL EFFICIENT DEPENDABLE IMPORTANT: WHEN ORDERING PARTS BE SURE TO GIVE MODEL AND SERIAL NUMBER TEREX TEREX TEREX TEREX Bartell Bartell Bartell Bartell Ltd.
- Page 2 Terex For your convenience we have provided this space to record relevant data on your TEREX TEREX TEREX TEREX Bartell Bartell Bartell Bartell POWER PRODUCT. Date Purchased : _______________________ Type of Machine: ________________________ Dealer: (Name) __________________________ Model: ________________________ (Phone) __________________________...
-
Page 3: Safety Precautions
INSTRUCTION MANUAL AND PARTS LIST FOREWORD The Terex Bartell Ltd.B424 Mini-trowel / Edger has been developed to float and finish the edges of concrete floors, up to perimeter walls, around columns and small areas, eliminating tiring hand troweling and increasing overall productivity and quality. -
Page 4: Starting Procedures
ASSEMBLY INSTRUCTIONS Your new mini-trowel comes to you fully assembled. All you have to do, is unfold the handle and fasten the knob. Remove any shipping or packing materials. Be sure to remove and discard the band securing the safety/stop switch to the left handle. This serves only to facilitate shipping and is not intended to be a permanent feature. -
Page 5: Maintenance
PREPARATION OF CONCRETE SURFACE Use of a mechanical or vibrating screed to “strike” the concrete surface to level will provide good compaction to the slab and produce an ideal surface for finishing. It should be remembered that floating/finishing machines cannot repair or correct a poorly screeded slab. -
Page 6: General Maintenance
LUBRICATION ENGINE For full lubricating instructions refer to engine manufacturer’s manual. GEARBOX In operation the gear box lubricant is in a fluid state. When the machine is stopped the lubricant returns to its normal gel state. It will only be necessary to inspect the sealed components if the outside of the gear box gets too oily or otherwise shows evidence of a leak. -
Page 7: Changing Blades
WEEKLY Check belt for wear. Replace if worn. Check blades for wear. replace as required. Change engine oil as required. Check for loose nuts and bolts. Tighten as required. CHANGING BLADES Be sure spark plug is disconnected before changing the blades. Make certain that the machine is on a flat surface and the blades are flat. - Page 8 We agree to furnish without charge, FOB our plant , a replacement for any part or portion thereof, comprising the drive train of the Bartell B424, consisting of the drive shaft and the gear case assembly, save and except for pulleys, drive belts and power units which prove...
- Page 9 10919 - Washer 5/16 " 21316 - WI 145 Engine 4 Hp. 21340 - Honda GX 120 Engine 4 Hp 11612 - Small Hand Knob Ass’y B424 21342 - B&S Vanguard Engine 4 Hp 11613 - Screw Shaft 11614 - Lock washer m8...
- Page 11 11752 - Socket Head Screw m8 x 25 11753 - Retaining Screw m10 x 25 11754 - Lift Lever 11755 - Main Shaft 11756 - Pressure Plate B424 11757 - Spider Plate 11758 - Stabilizer Ring 11759 - Trowel Arm...