Datel WLE-XA10009 User Manual

Wireless 'N' Networking Adapter™
For Xbox 360

1. Introduction

Congratulations on your purchase of this state-of-the-art Wireless 'N' Networking
Adapter™ for Xbox 360®. The Wireless 'N' Networking Adapter ™ has been specifically
developed for maximum wireless performance using dual band 802.11n wireless
technology at speeds of up to 7x faster and up to twice the range of the prior 802.11g
wireless technology.
Wireless 'N' Networking Adapter is the only third party Xbox 360 wireless N adapter to
offer 100% compatibility with the Xbox 360 console. Wireless 'N' Networking Adapter is
compatible with 802.11a, 802.11b, 802.11g and 802.11n wireless networks.
To use the Wireless 'N' Networking Adapter you will require an Xbox LIVE™ membership.
For more information about Xbox LIVE™, please see your Xbox 360 set-up manual. To use
the Wireless 'N' Networking Adapter with Xbox LIVE™ you will require a high speed
internet connection and a compatible wireless network.
Important Software Requirements: In order to support the Wireless 'N'
Networking Adapter your Xbox 360 console will need to have the latest Xbox LIVE
update installed. Using the wired Ethernet connection on your console and an
Ethernet cable (not included) connect to Xbox LIVE to install the latest update.

2. Safety Information

As with any gaming peripheral you are advised to take regular breaks during your gaming
session especially if any discomfort occurs.
Do not expose the product to temperatures in excess of 40
User Guide
V1.00
o
C or below -10

3. Carton Contents


Wireless 'N' Networking Adapter

This User Guide

4. The Wireless N Adapter

5. Attaching the Wireless N Adapter

Before you can use the Wireless 'N' Networking Adapter you will need to attach the
adapter to your console.
To do this, insert the clips on the Wireless 'N' Networking Adapter into the attachment
slots beside the Ethernet and USB connection on the rear of your Xbox 360. Next connect
the USB cable to the USB port beside the adapter and disconnect the Ethernet cable
inserted in the Ethernet port. To complete the attachment make sure both of the
o
C.
antennas are facing upwards.

Antennas: Wirelessly send and
receive data packets.

Status Lights: Indicate the
adapter's status.

Clips: Attach the adapter to a
console.

USB Cable: Connect to a console.