Advertisement
Table of Contents
DA1270
page
2
Start-up with DECT GAP Basisstation
2
Operational Place of Repeater
3
Start Configuration
4
Cascading (Daisy Chain)
5
ex-works-setting (Reset)
Connectors, LED, USB, Button
6
Software Upgrade
Question and Answers (FAQ)
7
Security Advices
8
Warranty
9
Recycling
10
CE Conformity
DECT Repeater
Manual
-1-
Advertisement
Table of Contents
Summary of Contents for DOSCH&AMAND Products DA1270
- Page 1 DA1270 DECT Repeater Manual page Start-up with DECT GAP Basisstation Operational Place of Repeater Start Configuration Cascading (Daisy Chain) ex-works-setting (Reset) Connectors, LED, USB, Button Software Upgrade Question and Answers (FAQ) Security Advices Warranty Recycling CE Conformity...
- Page 2 DECT Base Station (see Manual of DECT Base Station) press „Registration“ at DECT Base Station wait till DA1270 is in operational mode Operational Place of Repeater For best selection of operational place follow below rules a-c divide in half the distance...
- Page 3 Up to 5 Repeater can be configured in a star around the DECT Base. Follow chapter „SET-UP with DECT Base Station“ and set sequentially DA1270 Repeater in operation. Please assure that all Repeaters are close together at DECT Base and switched-on during the whole process.
- Page 4 Follow chapter „SET-UP with DECT Base Station“ and set sequentially all DA1270 Repeater in operation. After registration place the Repeaters at their individual operational place Cascades are not always supported by DECT Base Stations (hop=0).
- Page 5 Press Side Key for 5 seconds to activate the RESET function of the product. All settings are reset to ex-works conditions After RESET the DA1270 Repeater is automatically starting the SEARCH Mode for DECT Base Station. Connectors, LED, side key...
-
Page 6: Software Upgrade
Software Upgrade Software Upgrades for DA1270 can be downloaded via USB connector and USB cable to PC. Please search your Supplier’s website to get information about such Software Upgrades FAQ Questions and Answers Please contact the respective Websites of manufacturer and/or... -
Page 7: Security Advices
Security Advices Make sure your DA1270 is not exposed to heat and interference from electrical devices e.g. motors and transformers. DA1270 shall be not be placed close to metallic walls. Place DA1270 in wall sockets only with LEDs on top. -
Page 8: Warranty
Warranty Your dealer warrants for 2 years for material and manufacturing quality of the product. Appointed date is the date of Buyer‘s receipt. The Buyer has the right for repair or replacement. Returned and replaced products will pass its property to the Seller. In case of defects Buyer has to immediately inform the Seller about such defects. - Page 9 Recycling Please contact your Seller regarding Recycling of your product. In no case get disposed of your product via household garbage. Manual for DA1270 DECT Repeater English Version 2.0 Edition 01 January 2017 Editor DOSCH&AMAND Products GmbH München...
-
Page 10: Technical Support
CE Conformity This product fulfills the requirements of EU rules 2004/108/EG (Richtlinie des Europäischen Parlaments und des Rates zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über die elektromagnetische Verträglichkeit und zur Aufhebung der Richtlinie 89/336/EWG), and 2006/95/EG (Richtlinie des Europäischen Parlaments und des Rates zur Angleichung der Rechtsvorschriften der Mitgliedstaaten betreffend elektrische Betriebsmittel zur Verwendung innerhalb bestimmter Spannungsgrenzen).
Need help?
Do you have a question about the DA1270 and is the answer not in the manual?
Questions and answers