Mini COUNTRYMAN PLUG-IN HYBRID Owner's Manual page 86

Hide thumbs Also See for COUNTRYMAN PLUG-IN HYBRID:
Table of Contents

Advertisement

CONTROLS
ward until the best possible belt guide position
is reached.
Child seat security
The rear safety belts and the front passenger
safety belt can be permanently locked to fasten
child restraint systems.
LATCH child restraint fixing system
General information
LATCH: Lower Anchors and Tether for Children.
Pay attention to the operating and safety infor‐
mation of the child restraint system manufac‐
turer when installing and using LATCH child re‐
straint fixing systems.
Mounts for the lower LATCH anchors
The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lb/30 kg when the child is
restrained by the internal harnesses.
Safety information
WARNING
If the LATCH child restraint fixing systems
are not correctly engaged, the protective effect
of the LATCH child restraint fixing system can
be limited. There is a risk of injuries or danger
to life. Make sure that the lower anchors are se‐
curely engaged and that the LATCH child re‐
straint fixing system fits securely against the
backrest.◀
86
Transporting children safely
Online Edition for Part no. 01402983594 - X/17
Locking the safety belt
1.
Pull out the belt strap completely.
2.
Secure the child restraint system with the
safety belt.
3.
Allow the belt strap to be pulled in and pull
it tight against the child restraint system.
The safety belt is locked.
Unlocking the safety belt
1.
Unbuckle the safety belt buckle.
2.
Remove the child restraint system.
3.
Allow the belt strap to be pulled in com‐
pletely.
In some cases it may be necessary to separate
the lower belt attachment. Safety belts, refer to
page 76.
Position
Symbol
Meaning
The corresponding symbol
shows the mounts for the
lower LATCH anchors.
Seats equipped with lower an‐
chors are marked with a pair,
2, of LATCH symbols.
For vehicles equipped with a
middle seat:
It is not recommended to use
the inner lower anchors of
standard outer LATCH posi‐
tions to fasten a child restraint
system on the middle seat. Use
the vehicle safety belt instead
for the middle seat.
Before installing LATCH child restraint
fixing systems
Pull the safety belt away from the area of the
child restraint system.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents