SAFETY WARNINGS AND GUIDELINES Power Use this light fixture with a constant voltage power supply only. Using it with a dimmer can result in unexpected operation and damage to the fixture. Unplug this device from the power source when not in use. ...
Do not expose this device to rain, water, or moisture of any kind. Do not use in extremely dusty environments. Do not touch the device or power cord with wet hands. When installing this device, ensure that there are no flammable materials within about 8 feet above and on all sides.
FEATURES 60-watt 3200K white LED Produces up to 3300 Lux at 2 meters 13°-35° adjustable beam angle Adjustable beam size using four independently adjustable shutters Manual focus control Manual zoom control 3-channel DMX control ...
PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 1x 60-Watt COB LED ellipsoidal light 1x AC power cord (NEMA 5-15P to IEC 60320 C13) 1x User's manual MENU DISPLAY AND CONTROLS MENU: Press the MENU button to cycle through the DMX512, Dimmer, Strobe, Fade, and...
DMX CONTROL A single light fixture can be connected to and controlled by a DMX512 controller. To use the light with a controller, repeatedly press the MENU button until DMX512 [MODE] is displayed, then press the Enter button to edit the value. Use the Up and Down buttons to select a channel from 001-512.
DIMMING AND STROBE CONTROL Dimmer Mode The Dimmer function controls the light's brightness. To enter Dimmer Mode, press the MENU button repeatedly until Dimmer [MODE] is displayed, then press the Enter button to edit the value. Use the Up and Down buttons to adjust the displayed value. The dimmer can be set to any value between 0 (off) and 4096 (maximum brightness).
MANUAL CONTROL In addition to the DMX or built-in electronic controls, you can control the size of the light beam as well as its focus. Shutters Four shutter levers are located on the top, bottom, and on each side. The shutters are used to crop the light from the opposite side of the fixture, so the top shutter crops the light beam from the bottom of the fixture, the bottom crops from the top, the left crops from the right, and the right crops from the left.
7 days a week. You can also get assistance through email by sending a message to tech@monoprice.com SPECIFICATIONS Model 612756 Light Source 1x 60-watt 3200K white LED Minimum Beam Angle 13°...
REGULATORY COMPLIANCE Notice for FCC This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices.
Need help?
Do you have a question about the 612756 and is the answer not in the manual?
Questions and answers