1. Your radio has the following features: Congratulations on your purchase of a Eagle EVR-100 marine band VHF radio. It provides the following useful features: Prominent channel display Adjustable keypad backlighting for easy night-time use Waterproof and submersible to comply with JIS-7...
ALL channels scan mode C1 C2 C3 Shows which of the 3 favourite channels, if any, are selected. Otherwise blank 88 (small) 18.8 (BIG) Channel selected U I C Selected Channel bank for VHF radio operations and regulations ( USA, International, Canada) Low Battery warning (activates at 10.5V) Channel is temporarily deleted from the ALL SCAN operation...
Page 4
the weather station, it is picked up automatically and the alarm sounds. Press any key to hear the weather alert voice message. Channel Bank. Press to toggle between USA, International or Canadian channel banks. The selected channel bank is displayed on the LCD along with the last used channel.
power transmission setting is incorrect. Some channels allow only low power transmissions initially, but can be changed to high power by holding down H/L and PTT at the same time. See Appendix for a complete listing of channel charts. Push To Talk. On the microphone ONLY Push to start the transmitting 4.
Press and release the SCAN button to activate the All Scan function. The SCAN and ALL indicator appears on the LCD during All Scan. In All Scan mode, all channels in the channel set are scanned in sequence except the channel set as Cancel channel using SKIP button operation. After the last channel number has been scanned, the cycle repeats.
will disappears on the LCD. NOAA WEATHER ALERT TESTING ’ NOAA tests the alert system ever Wednesday between 11AM and 1PM. To test the QUANTUM NOAA Weather feature, on Wednesday between 11AM and 1PM, setup as in description above and confirm the alert is heard.
Appendix A – Technical Specification TECHNICAL SPECIFICATIONS Eagle EVR-100 GENERAL Power Supply: 13.8V DC. Current drain: Transmit 1.5 A at 7 W Tx / 0.6A at 1W Tx Receive Less than 250mA in standby Useable channels: International, USA, Canada, Weather (country speci.c)
Appendix B – Troubleshooting 1. The transceiver will not power up. A fuse may have blown OR there is no voltage getting to the transceiver. a) Check the power cable for cuts, breaks, or squashed sections. b) After checking the wiring, replace the 7 Amp fuse (1 spare fuse is supplied). c) Check the battery voltage.