1. Manuals
  2. Brands
  3. SAM Electronics Manuals
  4. Marine Radio
  5. AIS 3410
  6. Technical manual

SAM Electronics AIS 3410 Technical Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Technical Manual
Automatic Identification System
AIS 3410
Electronics Unit
Item No.: ED3047G842
Revision: 01 (2009-08)
Order No.: 390007907

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AIS 3410 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SAM Electronics AIS 3410

  • Page 1 Technical Manual Automatic Identification System AIS 3410 Electronics Unit Item No.: ED3047G842 Revision: 01 (2009-08) Order No.: 390007907...
  • Page 2 © SAM Electronics GmbH 2009 This document is our property for which we reserve all rights, including those relating to patents or registered designs. It must not be reproduced or used otherwise or made available to any third party without our prior permission in writing.

  • Page 3: Table Of Contents

    Open the Housing of AIS 3410 2.9.2 Open the Housing of UAIS DEBEG 3400 2.9.3 Merge the AIS 3410 Electronics Unit into the UAIS DEBEG 3400 Housing 2.10 Media Converter Installation (necessary for ships with BNC LAN networks) Installation Recommendations General Recommendations 3.1.1...
  • Page 4 Trouble Shooting 6.1.1 Hints 6.1.2 Fault Tree 6.1.3 Trouble Shooting for AIS 3410 connected to a RADARPILOT 1000/1100 6.1.3.1 Indication: System Fault Message 3617 Displayed on Indicator 6.1.3.2 Indication: System Fault Message 3616 Displayed on Indicator Test of the Antenna Performance Software Update 6.3.1...

  • Page 5: List Of Figures

    List of Figures List of Figures Fig. 2-1 AIS 3410 in RADARPILOT 1000/1100 systems Fig. 2-2 AIS 3410, SAM Electronics 1000/1100 series systems (NACOS xx-4/NACOS xx-5) Fig. 2-3 AIS 3410 with CHARTPILOT stand-alone Fig. 2-4 AIS 3410 in NACOS xx-3 systems Fig.
  • Page 6 AIS 3410, Electronics Unit List of Figures Technical Manual ED3047G842 / 01 (2009-08) t_ue_eAV.fm / 27.08.09...

  • Page 7: List Of Abbreviations

    AIS 3410, Electronics Unit List of Abbreviations Technical Manual List of Abbreviations This list also contains abbreviations which are not used in this manual but in additional documentation. Automatic Identification System BIIT Built-In Integrity Test Course Over Ground Digital Selective Call...

  • Page 8: Ed3047G842 / 01 (2009

    List of Abbreviations AIS 3410, Electronics Unit Technical Manual ED3047G842 / 01 (2009-08) t_ue_eak.fm / 27.08.09...

  • Page 9: General

    However, they are given without any commitment. As far as is permis- sible, any liability on the part of SAM Electronics for resulting damage is expressly ruled out, regardless of whether the damage is of a direct or indirect nature.
  • Page 10 1 General AIS 3410, Electronics Unit 1.3 Safety Warnings Technical Manual Boards and units that contain ESD-endangered semiconductors are marked with the symbol shown above. All assisting persons who might come into contact with the endangered boards must also use the ESD equipment.

  • Page 11: Overview

    The AIS 3410 is equipped with a 16 channel GPS receiver and provides position data according to IEC 61162 Edition 3, so that it is suitable for the use as a position sensor. In areas where the VTS stations provide differential correction data via VHF link the AIS 3410 switches automatically into DGPS mode.

  • Page 12: Ais 3410 In Radarpilot 1000/1100 Systems

    LAN connection only for radar with software version 3.0 or newe The AIS 3410 is connected to the Interconnection Box of the RADARPILOT 1000/1100. The ship’s sensors are connected to the radar(s). The sensor data are transferred from the radar(s) to the AIS (in dual or multiple installations, from two radars as redundancy, if possible).

  • Page 13: Ais 3410 In 1000/1100 Series Systems (Nacos Xx-4 And Xx-5)

    AIS 3410, SAM Electronics 1000/1100 series systems (NACOS xx-4/NACOS xx-5) The AIS 3410 is connected to the Interconnection Box of the RADARPILOT/CHARTRADAR 1000/1100. The ship’s sensors are connected to the radars. The sensor data are transferred from the radar(s) to the AIS (in dual or multiple installations, from two radars as redundancy, if possible).

  • Page 14: Ais 3410 In Chartpilot Stand-Alone Systems

    Fig. 2-3 AIS 3410 with CHARTPILOT stand-alone The AIS 3410 is connected to the CHARTPILOT via Ethernet LAN. The ship’s sensors are connected to the Navigation Interface. The sensor data are transferred to the CHARTPILOT via an RS422 interface. NOTE: If the AIS Electronics Unit receives the ship’s sensor data from Ship’s Interface, the output interfaces of...

  • Page 15: Ais 3410 In Nacos Xx-3 Systems (Radar 9Xxx And Chartpilot)

    AIS 3410, Electronics Unit 2 Overview Technical Manual 2.5 AIS 3410 in NACOS xx-3 Systems (Radar 9xxx and CHARTPILOT) 2.5 AIS 3410 in NACOS xx-3 Systems (Radar 9xxx and CHARTPILOT) Antenna Antenna Antenna Antenna Transceiver Transceiver Transceiver Transceiver Ship's Ship's...

  • Page 16: Ais 3410 In Radar 9Xxx Systems With Radarpilot 1000/1100

    AIS 3410 in Radar 9xxx systems with RADARPILOT 1000/1100 The AIS 3410 is connected to the CHARTPILOT via Ethernet LAN and to the Analog Interface of the RADARPILOT 1000/1100. The RADARPILOT 1000/1100 transfers the AIS data via CAN1, so that the data can be displayed also at the Radar 9xxx (or at a MULTPILOT 91x0).

  • Page 17: Ais 3410 In Radar 9Xxx Systems

    AIS 3410 in Radar 9xxx systems The AIS 3410 is connected to the Ship’s Interface by means of the additional Radar 9xxx AIS Interface. For further information see the Technical Manual of the Radar 9xxx AIS Interface. The cabling diagrams...

  • Page 18: Housing Of The 3410 Electronics Unit

    2.8 Housing of the 3410 Electronics Unit Fig. 2-7 AIS 3410 Electronics Unit (current version) The plastic housing of the 3410 contains a single Electronics Unit which consists of the controller, the interfaces, the VHF transmitter/receiver and the GPS receiver. The Electronics Unit has five cable inlets for ship’s cables and two coaxial connectors for the connection of GPS and VHF antennas.

  • Page 19: Replacement Of Ais Electronics Unit

    2.9 Replacement of AIS Electronics Unit In case of replacing the UAIS DEBEG 3400 Electronics Unit with a AIS 3410 Electronics Unit there is no need to remove the old housing. Therefore proceed as described below. To ensure the correct display of all data please refer to Technote T-0908-3400-023.

  • Page 20: Merge The Ais 3410 Electronics Unit Into The Uais Debeg 3400 Housing

    AIS 3410 Electronics Unit (without housing) 2.10 Media Converter Installation (necessary for ships with BNC LAN networks) The media converter has to be installed between the AIS 3410 and the BNC LAN plug of the ship´s network. Mount the mounting plate including the media converter on the wall or on the ground near to the AIS 3410 Electronics Unit.

  • Page 21: Installation Recommendations

    Cabling Documents of the corresponding equipment (consisting of schematic diagram, remarks, cable list and connection diagram). Interface connections should be discussed and agreed with SAM Electronics In order to ensure proper functioning of the equipment, the cable types should be selected according to the cable lists.

  • Page 22: Maximum Cable Length

    3 Installation Recommendations AIS 3410, Electronics Unit 3.1 General Recommendations Technical Manual All cables must be secured by means of suitable clamps (pull-relief) before entering the units. It must be ensured that cables do not block any moving parts within a unit.

  • Page 23: Cable Sets

    AIS 3410, Electronics Unit 3 Installation Recommendations Technical Manual 3.1 General Recommendations 3.1.1.2 Cable Sets The following cable sets are available: Purpose/Description Quantity/m Order No. LAN network, cable RG 213/U, 2 BNC on request 300005394 connectors Connection of the GPS antenna, cable...

  • Page 24: Specific Recommendations

    The equipment should never be switched on by the electricians who did the installation work - not even just for a moment - never! This is a job for the authorised SAM Electronics service engineer. After hand-over of the equipment in good operating condition to the customer, the Installation Report (Annex of the Warranty Certificate) should be filled in completely and then forwarded to SAM Electronics, Hamburg, as proof of such fulfilment.

  • Page 25: Recommendations Concerning The Installation Of The Electronics Unit

    AIS 3410, Electronics Unit 3 Installation Recommendations Technical Manual 3.2 Specific Recommendations 3.2.2 Recommendations Concerning the Installation of the Electronics Unit The Electronics Unit should be mounted on a vertical bulkhead. A distance of at least 300 mm from other devices must be ensured around the housing for sufficient air circulation.

  • Page 26: Recommendations Concerning The Installation Of The Vhf Antenna

    3 Installation Recommendations AIS 3410, Electronics Unit 3.2 Specific Recommendations Technical Manual 3.2.3.1 Recommendations Concerning the Installation of the VHF Antenna Superstructures, Superstructures, e.g. deck house, e.g. deck house, Mast, boom, railing Mast, boom, railing funnel, funnel, with small diameter...

  • Page 27: Recommendations Concerning The Installation Of The Gps Antenna

    AIS 3410, Electronics Unit 3 Installation Recommendations Technical Manual 3.2 Specific Recommendations 3.2.3.2 Recommendations Concerning the Installation of the GPS Antenna Satellites Satellites Superstructures, Superstructures, e.g. deck house, e.g. deck house, funnel, funnel, Mast, boom Mast, boom with small diameter...

  • Page 28: Recommendations Concerning Redundancy

    If two Ship’s Interfaces are existing because of redundancy purposes, the ship’s sensor output(s) of both Ship’s Interfaces must be connected to the AIS Electronics Unit. 3.2.5 Recommendations Concerning the Connection of a (D)GPS to AIS 3410 For an AIS stand-alone installation with the connection of an external (D)GPS position sensor, the...

  • Page 29: Recommendations Concerning Ais Stand-Alone With Radar 9Xxx / Nacos

    3.2 Specific Recommendations 3.2.8 Recommendations Concerning AIS Stand-alone with Radar 9xxx / NACOS xx-2/-3 An AIS 3410 can be used with an existing Radar 9xxx installation without any additional software update if the following prerequisites are fulfilled: All necessary ship’s sensors are connected additionally to the AIS Electronics Unit. The sensors must be connected directly (a Gyro Converter Unit may be necessary).
  • Page 30 3 Installation Recommendations AIS 3410, Electronics Unit 3.2 Specific Recommendations Technical Manual ED3047G842 / 01 (2009-08) t_ue_e03.fm / 27.08.09...

  • Page 31: Functional Description

    AIS 3410, Electronics Unit 4 Functional Description Technical Manual 4.1 Block Diagram Functional Description The AIS system consists of the following components: AIS 3410 Electronics Unit GPS antenna 1330FW VHF antenna CXL 2-1 The functionality is described in Section 4.1...

  • Page 32: Termination

    4 Functional Description AIS 3410, Electronics Unit 4.2 Termination Technical Manual The VHF transmitter/receiver has a limited range. By means of the connection of a long range commu- nication system (such as a satellite communication system) to the long range port, this limitation can be eliminated.

  • Page 33: Description Of The Components

    AIS 3410, Electronics Unit 4 Functional Description Technical Manual 4.3 Description of the Components 4.3 Description of the Components 4.3.1 AIS 3410 Electronics Unit Antennas Electronics Unit Interfaces and Displays Mainboard Sensor Input Channels AIS - A RS422, IEC 61162 -1/2...

  • Page 34: Interfaces

    The static ship’s data such as ship’s name, callsign and destination are input by means of the VSD and SSD messages. See IEC 61993-2 for valid messages. This port is connected to the SAM Electronics system, for example. Additionally, the sensor data (VDO message) are sent with a repetition rate of 1 Hz.

  • Page 35: Internal Connectors

    AIS 3410, Electronics Unit 4 Functional Description Technical Manual 4.3 Description of the Components 4.3.1.2 Internal Connectors LAN (RJ-45) Fig. 4-5 Internal connectors For retrofit of older housings (UAIS DEBEG 3400) refer to Section 2.9. Installation of the Media Converter refer to Section 2.10.
  • Page 36 4 Functional Description AIS 3410, Electronics Unit 4.3 Description of the Components Technical Manual Input sentences in compliance with IEC 61162-1/-2 Required Sentence Optional Sentence Data (Identifier and Description) (Identifier and Description) Reference Datum DTM (Datum reference) Positioning System: - GNS (GNSS fix data)

  • Page 37: Supported Sentences For The Ais Primary Display Port And The Pilot Port

    AIS 3410, Electronics Unit 4 Functional Description Technical Manual 4.3 Description of the Components 4.3.1.4 Supported Sentences for the AIS Primary Display Port and the Pilot Port Input Input sentences in compliance with IEC 61162-1/-2 Data Sentence Identifier/Description Normal Access - Parameter Entry...

  • Page 38: Supported Sentences For The Long Range Port

    4 Functional Description AIS 3410, Electronics Unit 4.3 Description of the Components Technical Manual Output Output sentences in compliance with IEC 61162-1/-2 Data Sentence Identifier/Description Prepared by AIS Unit Notification that a session initiated by the messages ABM, ABK (Acknowledgement message)
  • Page 39 AIS 3410, Electronics Unit 4 Functional Description Technical Manual 4.3 Description of the Components Output Output sentences in compliance with IEC 61162-1/-2 Data Sentence Identifier/Description Long range function identification, MMSI and Name LRF (Long range function identification) - Ship’s name, call sign, IMO number...

  • Page 40: Supported Sentences For The Internal Position Sensor

    4 Functional Description AIS 3410, Electronics Unit 4.3 Description of the Components Technical Manual 4.3.1.6 Supported Sentences for the Internal Position Sensor Output Output sentences in compliance to IEC 61162-1, edition 3, 04/2007 (NMEA0183 version 3.01) Data Sentence Identifier/Description Datum reference DTM (Datum reference) - Local datum (e.g.

  • Page 41: Iec 61162 -1/-2 Interfaces, Electrical Characteristics

    - Local zone minutes (xx data or empty field) The AIS 3410 is equipped with a 16 channel GPS receiver and provides position data according to IEC 61162, edition 3, 04/2007 (NMEA0183 version 3.01), so that it is suitable for the use as a position sensor.

  • Page 42: Example For The Interconnection

    4 Functional Description AIS 3410, Electronics Unit 4.3 Description of the Components Technical Manual 4.3.1.8 Example for the Interconnection Gyro Interface 4901 +24 V AIS Electronics Unit Common Alarm make Alarm center Alarm break + 24 V Terminals 5 4 1...

  • Page 43: Gps Antenna

    Pilot Port, connector assignment, front view (pins) For passages of the Panama Channel a 125 V AC supply (NEMA 5-15) must be available for the pilot. For ships with 230 V mains, the transformer 271257903 can be ordered from SAM Electronics. ED3047G842 / 01 (2009-08)
  • Page 44 4 Functional Description AIS 3410, Electronics Unit 4.3 Description of the Components Technical Manual ED3047G842 / 01 (2009-08) t_ue_e04.fm / 27.08.09...

  • Page 45: Setting-To-Work/Configuration

    AIS 3410, Electronics Unit 5 Setting-to-Work/Configuration Technical Manual 5.1 Setting-to-Work Setting-to-Work/Configuration 5.1 Setting-to-Work The AIS Electronics Unit and the antennas must be installed as described in Section 3 (I n s t a l l a t i o n R e c o m m e n d a t i o n s ).

  • Page 46: Configuration With Chartpilot 93Xx In Nacos Xx-3 Systems

    5 Setting-to-Work/Configuration AIS 3410, Electronics Unit 5.4 Testing Technical Manual 5.3.2 Configuration with CHARTPILOT 93xx in NACOS xx-3 Systems It is necessary to configure the CHARTPILOT 93xx and the interfaces of the Ship’s Interface. For infor- mation in detail see the Technical Manual of the CHARTPILOT 93xx.

  • Page 47: Repair/Maintenance

    AIS 3410, Electronics Unit 6 Repair/Maintenance Technical Manual 6.1 Trouble Shooting Repair/Maintenance GENERAL: The jumper settings and switch settings on a replacement pcb must be the same as on the defective pcb. The wire connections must be made in exactly the same way. Exceptions are explained in this manual.

  • Page 48: Fault Tree

    6 Repair/Maintenance AIS 3410, Electronics Unit 6.1 Trouble Shooting Technical Manual 6.1.2 Fault Tree Failure Description Possible Causes Service Measure Spare Part No. Software hung up Reset Electronics Unit Unusual behaviour of AIS Software failure caused e.g. (can be downloaded...

  • Page 49: Trouble Shooting For Ais 3410 Connected To A Radarpilot 1000/1100

    NOTE: The following instructions are valid only, if the AIS is connected via the Primary Display Port. The AIS 3410 Electronics Unit can also be connected via the Ethernet LAN (RADARPILOT/CHARTRADAR 1000/1100: with software 3.0 or newer or MULTIPILOT 1000/1100).

  • Page 50: Fig. 6-1 Cable Connection For The Interface Monitoring Radar > Ais

    6 Repair/Maintenance AIS 3410, Electronics Unit 6.1 Trouble Shooting Technical Manual Connect the AIS output TB14 and TB15 of the Analog Interface additionally to an indicator serial interface (TB1) of the radar. If there is a free input, this one should be used. If all inputs are used, one of them must be disconnected.

  • Page 51: Fig. 6-2 Protocol Radar Txd

    Test of the AIS 3410 Output Power Down the system Connect the AIS Primary Display Port TB7 and TB8 additionally to an indicator serial interface (TB1) of the radar.

  • Page 52: Fig. 6-3 Cable Connection For The Interface Monitoring Ais > Radar

    6 Repair/Maintenance AIS 3410, Electronics Unit 6.1 Trouble Shooting Technical Manual Primary Display Port RADARPILOT/CHARTRADAR 1000/1100 AIS Electronics Unit Analog Interface Connector 2 AIS RxD, Input - Output - AIS RxD, Input + Output + AIS TxD, Output - Input -...

  • Page 53: Fig. 6-4 Protocol Ais Txd

    AIS 3410, Electronics Unit 6 Repair/Maintenance Technical Manual 6.1 Trouble Shooting Status messages of the connected sensors, sent every minute !AIVDO,2,2,0,B,00000000000,2*25 !AIVDO,1,1,,,139K6D7037H@L7FBOLDCr39R0000,0*3D !AIVDO,1,1,,A,139K6D7037H@L7FBOLDCr39R08AM,0*78 !AIVDO,1,1,,,139K6D7037H@L9:BOLBCr39T0000,0*4F $AITXT,1,1,31,AIS: Heading valid*0D $AITXT,1,1,34,AIS: Other ROT source in use*62 !AIVDO,1,1,,,139K6D7037H@L;DBOL=kr39V0000,0*66 !AIVDM,1,1,,B,1000O@B038H@L:vBOL>Cr39V08Bg,0*65 !AIVDO,1,1,,,139K6D7037H@L=FBOL;kr39`0000,0*52 Position report !AIVDO,1,1,,,139K6D7037H@L?LBOL9kr39b0000,0*5A !AIVDO,1,1,,B,139K6D7037H@L?LBOL9kr39b0D01,0*6D !AIVDO,1,1,,,139K6D7037H@LALBOL7Sr39d0000,0*14 !AIVDO,1,1,,,139K6D7037H@LC<BOL5Sr39f0000,0*66...

  • Page 54: Indication: System Fault Message 3616 Displayed On Indicator

    The line for the Analog Interface must look as follows: SIR10T GE3044P207 F 6.2 Test of the Antenna Performance With the AIS 3410 Electronics Unit is possible to measure the voltage standing wave ratio (VSWR) of the VHF antenna. The measured values have the following meaning: - 1.0...1.5:...

  • Page 55: Determination Of The Current Software Versions

    The software versions of the radar and of connected systems are displayed. Use the scrollbar to search for the AIS software versions. AIS 3410 with RADAR 9x00 and MULTIPILOT 910x (Radar Mode): Press the Menu button. Select Utilities -> Self Check -> Version.

  • Page 56: Software Update By Means Of A Laptop

    6 Repair/Maintenance AIS 3410, Electronics Unit 6.3 Software Update Technical Manual Connection at the Electronics Unit The cable must be connected to the serial service interface of the computer and to the connector on the top of the Electronics Unit’s port Service Interface Fig.

  • Page 57: Software Update By Means Of A Chartpilot Or Multipilot 91X0

    AIS 3410, Electronics Unit 6 Repair/Maintenance Technical Manual 6.3 Software Update A status windows appears during the update. It must be waited until the message "Flash programming finished, system is rebooting" appears. The Electronics Unit reboots automatically. The OK button closes the window of the update routine.

  • Page 58: Opening The Housing

    AIS 3410, Electronics Unit 6.4 Opening the Housing Technical Manual 6.4 Opening the Housing Opening of the Electronics Unit housing of AIS 3410 Undo the four screws in the cover. To close the housing, proceed in the reverse order. 6.4.1 Fuses Electronics Unit The Electronics Unit contains no fuses.

  • Page 59: Technical Data

    Technical Data Conformity to Standards, Environmental Conditions The AIS 3410 Electronics Unit is complient with DIN EN 60945 (Maritime navigation and radiocommuni- cation equipment and systems - General requirements - Methods of testing and required test results). The Electronics Unit belongs to the category "protected from the weather".

  • Page 60: Performance Data Of The Vhf Antenna Clx 2-1/150-170 Mhz

    7 Technical Data AIS 3410, Electronics Unit 7.2 Performance Technical Manual 7.2.2 Performance Data of the VHF Antenna CLX 2-1/150-170 MHz Antenna type: ½λ coaxial, broad band Frequency: 150...170 MHz Nom. 50 Ω Impedance: Polarization: Vertical Gain: 2 dBi, 0 dBd...

  • Page 61: Performance Data Of The Gps Antenna

    AIS 3410, Electronics Unit 7 Technical Data Technical Manual 7.3 Dimensions and Weights 7.2.3 Performance Data of the GPS Antenna General: Color: White Weight: 163 g Nominal RF input: TNC female Operating temperature: -40...+85°C Humidity: 95% relative humidity Antenna Element: Frequency: 1575.42 ±10.0 MHz...
  • Page 62 7 Technical Data AIS 3410, Electronics Unit 7.4 Compass Safe Distances Technical Manual ED3047G842 / 01 (2009-08) t_ue_e08.fm / 27.08.09...

  • Page 63: Fault Code List

    AIS 3410, Electronics Unit 8 Fault Code List Technical Manual Fault Code List The following fault codes (integrity alarm conditions) can be displayed at the connected display unit (for example a RADARPILOT 1000/1100). See also Section 6 from page 47 on for further information.
  • Page 64 8 Fault Code List AIS 3410, Electronics Unit Technical Manual Messages at Error Message generated by, 1000/1100 Series, Possible Cause/Source, Radar 9xxx, MULTIP- Fault CHARTPILOT, Reaction of the System, ILOT 910x (Radar MULTIPLOT 910x Remedy Mode) (Chart Mode) Generated by: AIS Electronics Unit...
  • Page 65 AIS 3410, Electronics Unit 8 Fault Code List Technical Manual Messages at Error Message generated by, 1000/1100 Series, Possible Cause/Source, Radar 9xxx, MULTIP- Fault CHARTPILOT, Reaction of the System, ILOT 910x (Radar MULTIPLOT 910x Remedy Mode) (Chart Mode) Generated by: AIS Electronics Unit.
  • Page 66 8 Fault Code List AIS 3410, Electronics Unit Technical Manual ED3047G842 / 01 (2009-08) t_ue_e09.fm / 27.08.09...

  • Page 67: Cabling Documents

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Cabling Documents Grounding All components of the system have contacts such as bolts or terminals for grounding. Grounding is impor- tant for EMC purposes as well as for protecting people’s lives. Both purposes are covered by the standard grounding of the system’s housings to the ship’s metallic structure (bolted or welded).

  • Page 68: Fig. 9-1 Cable Diagram, Connection To Radarpilot 1X00, Nacos Xx-4/5 Via

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Fig. 9-1 Cable Diagram, connection to RADARPILOT 1x00, NACOS xx-4/5 via Primary Display Port ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...

  • Page 69: Fig. 9-2 Cable Diagram, Connection To Chartpilot, Nacos Xx-4/5, Radar

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Fig. 9-2 Cable Diagram, connection to CHARTPILOT, NACOS xx-4/5, RADAR / MULTIPILOT 1x00 via LAN ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...

  • Page 70: Fig. 9-3 Cable Diagram, Connection To Chartpilot Stand-Alone

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Fig. 9-3 Cable Diagram, connection to CHARTPILOT stand-alone ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...

  • Page 71: Fig. 9-4 Cable Diagram, Connection To Radar 9Xxx Via Radar 9Xxx Ais Interface (Nacos Xx-3)

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Fig. 9-4 Cable Diagram, connection to Radar 9xxx via Radar 9xxx AIS Interface (NACOS xx-3) ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...

  • Page 72: Fig. 9-5 Detailed Cable Diagram, Connection To Radarpilot 1X00, Nacos Xx-4/5 Via

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Fig. 9-5 Detailed Cable Diagram, connection to RADARPILOT 1x00, NACOS xx-4/5 via Primary Display Port ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...

  • Page 73: Fig. 9-6 Detailed Cable Diagram, Wheelhouse Console

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Fig. 9-6 Detailed Cable Diagram, Wheelhouse Console ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...

  • Page 74: Fig. 9-7 Detailed Cable Diagram, Connection To Nacos Xx-4/5, Radar

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Fig. 9-7 Detailed Cable Diagram, connection to NACOS xx-4/5, RADAR / MULTIPILOT 1x00 via LAN ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...

  • Page 75: Fig. 9-8 Detailed Cable Diagram, Connection To Chartpilot Stand-Alone Systems

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Fig. 9-8 Detailed Cable Diagram, connection to CHARTPILOT stand-alone systems ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...

  • Page 76: Fig. 9-9 Detailed Cable Diagram, Connection To Radar 9Xxx Ais Interface

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Fig. 9-9 Detailed Cable Diagram, connection to RADAR 9xxx AIS Interface ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...

  • Page 77: Fig. 9-10 Detailed Cable Diagram, Connection To Radar 9Xxx Ais Interface Pcb Ge 3044 G 220

    AIS 3410, Electronics Unit 9 Cabling Documents Technical Manual Fig. 9-10 Detailed Cable Diagram, connection to RADAR 9xxx AIS Interface PCB GE 3044 G 220 ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...
  • Page 78 9 Cabling Documents AIS 3410, Electronics Unit Technical Manual ED3047G842 / 01 (2009-08) t_ue_e11.fm / 27.08.09...

  • Page 79: Outline Drawings

    Area for cable inlet Space required for service ca. 700 Cover not shown Min. distance from: Standard compass: 0.4 m Steering compass: 0.3 m Protection category: IP22 Weight: 3kg Fig. 10-1 AIS 3410 Outline Drawing ED3047G842 / 01 (2009-08) t_ue_e12.fm / 27.08.09...

  • Page 80: Fig. 10-2 Ais Gps Antenna, 1/2

    AIS 3410, Electronics Unit 10 Outline Drawings Technical Manual All dimensions are indicated as inches. Fig. 10-2 AIS GPS antenna, 1/2 ED3047G842 / 01 (2009-08) t_ue_e12.fm / 27.08.09...

  • Page 81: Fig. 10-3 Ais Gps Antenna, 2/2

    AIS 3410, Electronics Unit 10 Outline Drawings Technical Manual Fig. 10-3 AIS GPS antenna, 2/2 ED3047G842 / 01 (2009-08) t_ue_e12.fm / 27.08.09...

  • Page 82: Fig. 10-4 Ais Vhf Antenna

    AIS 3410, Electronics Unit 10 Outline Drawings Technical Manual Fig. 10-4 AIS VHF antenna ED3047G842 / 01 (2009-08) t_ue_e12.fm / 27.08.09...

  • Page 83: Notes

    AIS 3410, Electronics Unit Notes Technical Manual Notes Space for your notes. ED3047G842 / 01 (2009-08) t_ue_eno.fm / 27.08.09...
  • Page 84 Notes AIS 3410, Electronics Unit Technical Manual ED3047G842 / 01 (2009-08) t_ue_eno.fm / 27.08.09...

Table of Contents

Save PDF