EliteProAV Insta-DE2 Series User Manual

Dry-erase front projection screen film

Advertisement

Quick Links

Dry-Erase Front Projection Screen Film
Thank you for choosing the Insta-DE2 Series dry-erase whiteboard projection screen! Please read through
this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.

Precautionary Notes:

Before using the dry-erase function of your whiteboard screen, please make note of the following
instructions to properly maintain and clean your dry-erase surface projection screen. (These Whiteboard
cleaning tips are just as relevant with any dry-erase writing surface as they are with our Whiteboard-
Projection Screens.)
1. Only use a high density foam eraser when removing dry-erase markings from the Whiteboard
screen.
2. Do not use abrasive erasers as these may scratch the surface of the screen.
3. Never spray the whiteboard cleaner solution onto the surface while marker writing is present and
then attempt to use a high density foam eraser to remove. This will only smear the dry-erase
marker ink making the surface more difficult to clean and will likely ruin the foam eraser.
4. If there are any dry-erase markings left behind even after attempting to remove them using our
high density erasers, spray our whiteboard cleaning solution directly onto the screen surface and
use only a soft microfiber cloth to wipe-down and clean the area.
For a video demonstration, please visit:
If replacement cleaning accessories are needed, please visit the Whiteboard cleaning accessories section of
our website at
http://www.elitescreens.com/clean-whiteboard

Product Features:

 Award winning and GREENGUARD certified VersaWhite material.
 1.1 gain with 180 degree wide viewing angle.
 Special anti-scratch layer to ensure long use as a
dry-erase/projection screen.

Application Advantages:

Instantly converts flat surfaces/walls into a dry-erase whiteboard projection screen.
Includes adhesive black velveteen border to enhance contrast and overall appearance.
Perfect dry-erase and projection solution for today's short throw projectors.
Ideal and effective instructional presentation tool in the classroom, boardroom, and training
facilities.
Rev. 122716 DR
Insta-DE2 Series
User's Guide
http://www.elitescreens.com/whiteboardscreen-cleaning
1
www.eliteproav.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Insta-DE2 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for EliteProAV Insta-DE2 Series

  • Page 1 Dry-Erase Front Projection Screen Film User’s Guide Thank you for choosing the Insta-DE2 Series dry-erase whiteboard projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life. Precautionary Notes: Before using the dry-erase function of your whiteboard screen, please make note of the following instructions to properly maintain and clean your dry-erase surface projection screen.
  • Page 2 (75g) IWB86VW2 IWB97XW2 IWB105HW2 IWB4.2x10W2 IWB4.2x20W2 IWB4.2x30W2 IWB114XW2 IWB5x10W2 IWB5x20W2 IWB5X30W2 Tools required (not included) Shop Towels Roller cover and frame Paint Tray Measuring Tape Carpenter's Pencil 150 grit sandpaper R-35 Primer Dust Mask Safety Goggles Rev. 122716 DR www.eliteproav.com...
  • Page 3 We recommend sanding the area first to make sure you have a clean flat and smooth surface. Failure to remove such imperfections can damage the product. The dry erase function of this product requires a smooth writeable surface and EliteProAV is not responsible should these instructions are not be properly followed.
  • Page 4 Use a sharp utility knife to cut a small hole in the center of the bubble. Inject some Professional R-35  primer with a syringe and smooth out the Insta-DE 2 screen surface with a smoothing tool. Rev. 041217 DR www.eliteproav.com...
  • Page 5 Safety Precautions: A. Avoid using sharp objects directly on the screen which can result in permanently damaging the product and voiding your warranty. B. Creases or wrinkles caused by improper installation are not removable. Rev. 041217 DR www.eliteproav.com...
  • Page 6 The surface to which you are installing this material to should be perfectly smooth. If in case the surface is uneven, it is recommended to place a smooth board over the desired space of the install first. This will eliminate any bubbling of the material over time. Rev. 041217 DR www.eliteproav.com...
  • Page 7 720.0 0.008 Unit: mm IWB5x40W2 5'x40' 60.2"x480.0" 1529 12192 IWB5x50W2 5'x50' 60.2"x600.0" 1529 15240 IWB5x60W2 5'x60' 60.2"x720.0" 1529 18288 Note: Data Error ±1" For more information, technical support or your local EliteProAV contact, please visit www.eliteproav.com Rev. 041217 DR www.eliteproav.com...

Table of Contents