Advertisement

Connected Car
Start Guide
Device by

Advertisement

Table of Contents
loading

Summary of Contents for Zte Connected Car

  • Page 1 Connected Car Start Guide Device by...
  • Page 2 Keep your family safe Receive real-time vehicle diagnostics Track the location of your car Stay connected with Wi-Fi LTE capable device...
  • Page 3 Most vehicles that are model year 1996 or newer in Canada have an OBD-II port that the ZTE OBD-II device plugs into. Before moving to step 2, be sure to check if your vehicle is compatible with the Bell Connected bell.ca/checkmycar...
  • Page 4: Download The App

    Step 2 Download the app The Bell Connected Car App, powered by Mojio, is required to access the complete experience, including your in-car Wi-Fi hotspot. The app is available on the Apple App Store and on Google Play. Search for “Bell Connected Car” in your app store or visit bell.ca/connectedcar...
  • Page 5: Create Your Account

    Step 3 Create your account To run the Bell Connected Car app on your smartphone, tap “Sign Up” on the home screen and follow the prompts to create a new account. You will be sent a verification code via SMS to confirm your mobile phone number.
  • Page 6 If your SIM card has not already been inserted, use the included tool to eject the SIM tray from the ZTE OBD-II device. Position the micro-SIM card so that it sits flush, then fully insert the tray. Only use the micro SIM card that was provided to you by Bell.
  • Page 7 I M E I : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Scan the IMEI barcode Every ZTE OBD-II device has a unique 15-digit code called the IMEI. The IMEI is shown as a barcode on a sticker on your device and also on the included Wi-Fi Glove Box Card.
  • Page 8 The OBD-II port is usually located underneath the driver’s side dashboard, often within 18 inches of the steering wheel. If you are having trouble locating the OBD-II port, the Bell Connected Car app will help you find it, or visit bell.ca/connectedcar Tip: Tap the flashlight icon in the Bell Connected Car app to turn on your smartphone’s flashlight...
  • Page 9: Install Your Device

    Step 7 Install your device Now that you’ve found your OBD-II port, you are ready to install the Bell Connected Car device. Align the device with your port and firmly plug it in. The device should fit snugly. Note: Only install the device when your engine is turned off.
  • Page 10 Go for a 10 minute drive to finish setting up your device. The device needs to establish a cellular connection and generate a GPS lock. The Bell Connected Car app will notify you once a successful connection is established. Distracted driving is never OK.
  • Page 11 This information can be found on the device and the included Wi-Fi Glove Box Card. You can manage your Wi-Fi hotspot, including turning it ‘On’ and ‘Off’, in the Bell Connected Car app. Under the menu, tap on ‘Wi-Fi hotspot’. Note: Ensure that you have selected a qualifying mobile Internet plan.
  • Page 12 Understanding your ZTE OBD-II device...
  • Page 13 Device Reset Hole Micro-SIM Card Slot Restart Key LED 1 LED 2 OBD-II Interface...
  • Page 14: Led Status Lights

    LED status lights LED Indicator LED Status LED 1 (Power) Green blinking The device is being powered by the internal battery. LED 1 (Power) Green solid The device is being powered by the vehicle. LED 2 (Signal) Red solid The device is on but is not connected to the cellular network.
  • Page 15: Additional Information

    Do not install or remove the ZTE OBD-II device while your vehicle is operating. Bell limits its liability in accordance with its Connected Car Terms of Service and other applicable Terms of Service available at bell.ca/legal Wi-Fi: A qualifying Bell rate plan, compatible devices and SIM card are required.
  • Page 16 Roaming charges may apply outside your local area. Use of Connected Car is subject to the Connected Car Terms of Service, the Bell Mobility Terms of Service and other applicable terms, all available at bell.ca/legal. Support...
  • Page 17 ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.

Table of Contents