Recommended Accessories - Millar MPVS Ultra User Manual

Fax 713-714-8497
24 hours a day, 7 days a week
Email info@millar.com
24 hours a day, 7 days a week
Web millar.com
Mail Millar, Inc.
6001-A Gulf Freeway
Houston, Texas 77023
USA
On-site installation and training for Millar products can be provided for an additional
charge. Please contact Millar's customer service department for further details.

Recommended accessories

Power cords
Requirements
The system has been qualified with power cords whose maximum length is 2.5m (8' 2").
The input connector on the MPVS Ultra rear panel is a standard EN60320/C14, so a power
cord with a standard EN60320/C13 connector is required.
Millar supplied cords
Millar can provide replacements for the cords that were shipped with the system. Use
these part numbers when ordering
850-5105 North American cord with NEMA 5-15 plug, 2m (6' 7") long
850-5118 European cord with CEE (7)VII plug, 2.5m long
850-5117 North American hospital grade power cord, 2.5m (8' 2") long (not included with
the system, but available as a replacement component)
Distributor
Your distributor may be able to provide you with a power cord.
Manufacturers
Feller www.feller-at.com
Interpower Corporation
Fuses
The system requires two fuses which can be replaced by removing the tray in the power
input module on the rear panel of the system. The parts are available from Millar.
Reference Millar part number 241-0180.
The fuse requirements are 1A, 250V.
Fuses are also available from most electronics distributors. An example is Bel Fuse, Inc.,
part number 5ST1-R,
M.I. P/N 004-2163 Rev. C
www.interpower.com
www.belfuse.com
39